PAC PAS Installation & Operation Manual - 2. Installations Tank
Manual is about: heat recovery
of
34
INSTALLATION AND OPERATION MANUAL
PAC HEAT RECOVERY WATER HEATER
Page 20
1.3 Should be space for the water pipe, refrigerant pipe and heater as a
picture as below.
2. Installations Tank
Measure and capture the water level to the point and drill holes for cleat
embedded lead (Expansion Anchors) taken together with the machine screw
number M8 tightening to four points as a pictures as below.
Look from side
Look from above
Knot (number M8)
Expansion Anchors
X
> 20 cm.
X
> 40 cm.