Pace 921VNX User Manual - Ront
2 |
P a g e
F
RONT
LED
S
LED
C
OLOUR
D
ESCRIPTION
P
OWER
OFF
Power Off (Power supply not plugged or I/0 switch off on the rear panel)
AMBER
Firmware update is on-going.
RED
CPE boot failure. Failure due to internal sequence or state that will prevent the device from
connecting to the access network or passing customer data.
GREEN
The device is powered on (power supplied and I/0 switched on the rear panel).
E
THERNET
OFF
No Ethernet device connected on the LAN.
SOLID GREEN
One Ethernet device connected and no traffic is passing through the CPE.
FLASHING GREEN
One Ethernet device connected and traffic is passing through the CPE (either direction).
W
IRELESS
OFF
Wi-Fi is disabled. (Option unchecked in the UI).
GREEN
Wi-Fi is enabled (Option checked in the UI) which is the default behaviour. A wireless device
can be connected.
WPS
OFF
WPS is disabled. (Option is unchecked in the UI).
SOLID GREEN
WPS is enabled (option is checked in the UI) which is the default behaviour.
FLASHING GREEN
WPS button is pushed on. Pairing process is on-going for 120 seconds. A wireless device can
be paired. After 120s the WPS Led becomes solid green.
P
HONE
1
OFF
No VoIP account set up.
or Registration to the softswitch failed.
SOLID GREEN
The VoIP account number one is set up and registered to the softswitch.
FLASHING GREEN
Phone call is on-going.
P
HONE
2
OFF
No VoIP account set up.
or Registration to the softswitch failed.
SOLID GREEN
The VoIP account number two is set up and registered to the softswitch.
FLASHING GREEN
Phone call is on-going.
3G
OFF
No 3G USB key plugged in the CPE.
S
OLID GREEN
A 3G USB key is plugged in and detected by the CPE. The CPE has a 3G WAN IP address.
B
ROADBAND
OFF
Broadband interface powered off, no signal detected.
S
OLID GREEN
Broadband physical connection is established (e.g. DSL sync).
FLASHING GREEN
Signal detected, in process of synchronizing.
I
NTERNET
OFF
Broadband physical interface connection not present.
RED
Device attempted to become IP connected and failed (DHCP, PPPoE, PPPoA, etc.).
S
OLID GREEN
The CPE has a WAN IP address and there is no activity on the WAN.
FLASHING GREEN
The CPE has a WAIN IP address and there is activity on the WAN.