Pacific B-1500 Parts & Operating Manual

Summary of B-1500

  • Page 1

    Please read this book this operator’s book has important information for the use and safe operation of this machine. Read this book carefully before starting the machine. Keep this book and tell all operators to read the book. If you do not follow the instructions, you can cause an injury or damage ...

  • Page 2

    Important safety instructions to ensure the safe operation of this machine, you must read and understand all warnings and instructions in this book. If you do not un- derstand, ask your supervisor. Warning: do not use the machine without reading the instruction sheet. Warning: to reduce the risk of ...

  • Page 3: Grounding Instructions

    Grounding instructions this machine must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This machine is equipped with a cord having an equipment-grounding conductor and grounding plug. The ...

  • Page 4: Operating Procedures

    Warning! For the safe operation of this machine follow the instructions given in this manual and the training given by your supervisor. Failure to do so can result in personal injury and/or damage to machine and property! Do not operate machine in an explosive environment! This machine is intended f...

  • Page 5: Operating Procedures

    Operation plug the machine’s power cable into a properly grounded outlet (see safety instructions). Next, adjust the handle height to a comfortable position by pulling up on the handle adjustment lever as shown below. The machine will not start when the handle is in the upright position. Once you ha...

  • Page 6: Operating Procedures

    Maintenance after each use: store the machine in a clean dry area. Wipe the entire machine and cord down with a clean cloth. Remove the pad and clean thoroughly. Wrap the machine’s electrical cord onto the handles and the cord hook provided. Check the cord and plug for nicks, cuts or damage. Report ...

  • Page 7

    B-1500 burnisher - wiring diagram application details for pad/brush use for best cleaning results, use the appropriate pad/brush for your cleaning application. If you need help sourcing the ap- propriate pads/brushes for your application, please contact your sales representative or if this is unknow...

  • Page 8

    Description part number qty bearing, sealed, press-in 902055 2 belt 903047 1 block, clamp, handle 531303 2 breaker, circuit, 18 amp 501350 1 brush kit, motor, carbon, 4-piece set 530902 1 bumper, 20-inch 481203 1 cord, electrical, 50-feet 908129 1 cover, motor 502396 1 driver, pad, 19-inch, flex 485...

  • Page 9

    9 b-1500 burnisher - b ase assembl y.

  • Page 10

    10 b-1500 burnisher - handle assembl y.

  • Page 11

    11 b-1500 burnisher - mo tor assembl y.

  • Page 12

    Warranty policy burnisher, b-1500 the pacific floorcare b-1500 burnisher has been manufactured, tested and inspected in accordance with specific engineering requirements and is warranted to be free from defects in workmanship and materials as follows: ten (10) years parts, one (1) year labor - rotat...