Pacific Currents PC-10053 Owner's Manual - Save Your Sales Receipt
2
PC-10053
First, compare the parts in the box with the parts list on the following pages and
make sure that none are missing. If you discover any missing parts, please visit
www.pacifi ccurrentsinc.com or call 888-474-2770.
Save your sales receipt
as you
will need this to obtain service.
Choose and measure the fi nal locati on where you would like to place the prod-
uct and ensure that it will fi t a 10’ x 10’ rectangle with 11’ height clearance. Then,
choose an assembly area as close as possible to this fi nal locati on and large enough
to layout and pre-assemble all the parts for this Gazebo.
It is highly recommended that you cover the work surface with a tarp or other fabric
to prevent scratches to the fi nish during assembly.
You will need these additi onal tools: a ladder and an adjustable wrench.
You may also need these additi ontal tools (opti onal): work gloves, waterproofi ng
spray.
Prepare the work area:
General Notes:
Pre-Assembly Steps
Thank you for choosing a Pacifi c Currents Product.
Please make sure you have carefully read and understood
these assembly instructions before you begin.
1. You will need the help of another person to assemble this product. Please ask a
friend or neighbor for assistance!
2. Once a unit has been pre-assembled in each step, please set it aside unti l further
instructi ons.
3.
For all customers, we highly recommend that you remove your canopy top in
cases of severe inclement weather such as thunderstorms. Unfortunately, damage
due to acts of nature are not covered in the warranty.
4. You do not need to disassemble the gazebo during winter months. However, to
prevent damage to the frame and canvas top due heavy snow loads, remove the
canvas top and store it in a dry locati on unti l spring.