2rider assembly manual 2rider assembly manual (picture shown with optional canopy and kid seats) canopy safety bar kid seats seats handlebar grip shifter brake luggage tray rear wheel front wheel suspension pedal rear deraileur bumper.
2rider assembly manual 2rider features • 4 seats for 2 riders and 2 passengers. • 8 speed gears for effortless rides. • full suspension for max comfort and safety. • large luggage tray for drinks and luggage. • roof canopy to keep off sun rays. • easy to store and easy to maintain. 2.
2rider assembly manual specification • chassis aluminum 7005t6, powder coated. • suspension all wheels independently suspended. • geometry ackermann geometry, center point steering. • wheels 20”(406) hi-pressure tires, alloy rims and hubs. • gears shimano 8 speed gears, 28~82” gear ratio. • seats ad...
2rider assembly manual step 1: take out all parts in the box and raise the chassis about 40 cm height for ease of assembly work. 4 1 2 3 4 5 6 7 8 9 10 11 12 (1) canopy (2) luggage tray (3) 2 kid seats (4) bow assembly (5) kid seats stay (6) kid seat safety bar (7) right side seat (8) left side seat...
2rider assembly manual 5 step 2: insert the handlebar stem to the steerer, tighten the clamp and the setting screw..
2rider assembly manual 6 step 3: connect the left steering link rod..
2rider assembly manual 7 step 4: assemble the pedals to crank arms at both sides.* this step will not affect any other sub-assembly, you can decide do it now or later. *note: always screw the “r” pedals on the chainwheel side clockwise and the “l” pedals on the crank side counterclockwise. Make sure...
2rider assembly manual 8 step 5: assemble the bow and front bumper to the chassis..
2rider assembly manual 9 step 6: assemble the front wheels to the front axle and hook the front v brake cable. *tools needed:10mm allen key wrench, 19mm open wrench..
2rider assembly manual 10 step 7: assemble the rear wheels to the rear dropouts and hook the rear v brake cable..
2rider assembly manual 11 step 8: assemble the luggage tray..
2rider assembly manual 12 step 9: assemble the seats, and insert the grip shifter on the right seat handlebar..
2rider assembly manual 13 step 10: assemble the kit seat to the kit seat stays, and assemble the kit seat subassembly to the main chassis. Insert the safety bar..
2rider assembly manual 14 step 11: assemble the canopy..
2rider assembly manual 15 step 12: align the handlebar and front wheels, adjust the derailleurs and brakes, and check all bolts and nuts are tight. Note: if you remove the canopy, 2rider can stand up to save storage space..
