PACIFIC CYCLE COMPACT BICYCLES 2006 Instruction Manual

Summary of COMPACT BICYCLES 2006

  • Page 1

    Correct fitting - make sure your helmet covers your forehead. Incorrect fitting. Forehead is exposed and vulnerable to serious injury. Always wear a properly fitted helmet when you ride your scooter. Do not ride at night. Avoid riding in wet conditions. Helmets save lives !!!.

  • Page 2

    Part 1 part 2 part 3 part 4 part 5 part 7 contents ...............................................................................1 safety ....................................................................................3 bicycle terms ................................................................

  • Page 3

    P art 2 - safety instruction manual: compact bicycles thank you for purchasing your folding bicycle. Before using your bicycle, please practice proper folding and unfolding procedures. Be sure to follow the sequence of steps carefully. Proper operation of your bicycle is important for your safety an...

  • Page 4

    Bicycle terms step 1 prepare to unfold your bicycle by standing on the side with the chain. The chain and crank will be in front of you. Step 1 unfolding instructions 1. Handlebar 2. Handle post 3. Handle post latch 4. Pedal 5. Crank 6. Chain 7. Seat post quick-release 8. Seat post 9. Re-bar step 2 ...

  • Page 5

    Step 3 lock the frame latch lever by pushing it in towards the frame. It should require 6 kg (14 lbs). Of force to close. Step 4 move the frame latch safety hook into the closed position. Your frame latch safety hook is in the closed position when it prevents the frame latch from opening. Step 3 ste...

  • Page 6

    Step 8 open the seat post quick-release lever and raise the saddle to the desired height. Close the seat post quick-release lever. Be sure not to raise the seat post beyond the safety line marked on the seat post. Step 9 attach or unfold the pedal(s). If you are attaching your pedal(s), please note ...

  • Page 7

    P art 5 - folding instructions step 1 prepare to fold your bicycle by standing on the side with the chain. The chain and crank will be in front of you. Step 1 step 4 swing the handle post into the folded position: upside down and flush against the front wheel. Be sure the front wheel stays parallel t...

  • Page 8

    Step 6 rotate the cranks so that the left crank is pointed forward and down at a 45 degree angle. Step 7 move the frame latch safety hook to the open position. Note: your frame latch safety hook may be in a slightly different position than shown in the picture above. Step 6 step 7 step 8 open the fr...

  • Page 9

    Warning: if you are in any way unsure of how to make these adjustments yourself, take your bike to a qualified bicycle technician for professional adjustment. P art 6 - adjusting the frame la tch step 10 snap the folding pedal(s) into the folded position by pushing the pedal body inwards and rotating...

  • Page 10

    P art 7 - adjusting the steel handle post la tches warning: if you are in any way unsure of how to make these adjustments yourself, take your bike to a qualified bicycle technician for professional adjustment. Adjusting the steel handle post latches your bicycle should arrive with the handle post lat...

  • Page 11

    18 limited warranty and policy on replacement procedures and responsibilities your purchase includes the following warranty which is in lieu of all other express warranties. This warranty is extended only to the initial consumer purchaser. No warranty registration is required. This warranty gives yo...