PACIFIC CYCLE IF Mode Owner's Manual

Summary of IF Mode

  • Page 1

    If mode owner manual if mode owner manual.

  • Page 2: How to Unfold

    If mode owner manual 2 how to unfold opening the box – a 100% assembled if mode is ready. To unfold the if mode: unfold the pedals and set left side crank down first, raise the seat and clamp, assemble the left and right handle grip in position..

  • Page 3: How to Unfold (Continued):

    If mode owner manual place your left hand on handle bar left grip (not the handle on top of the ‘mono’ front fork) with right hand holding the front of the seat. Move your right hand away from you and then back in a clockwise motion and your left hand slightly pushing the frame forward. How to unfol...

  • Page 4: How to Fold

    If mode owner manual how to fold press pedals outer body inward toward frame and rotate body upward to fold compact. Standing on the left side of the bike; open the quick release lever. Begin with your left hand on the left handle bar grip and your right hand on the saddle. The frame will hinge open...

  • Page 5: How to Fold (Continued)

    If mode owner manual 5 how to fold (continued) rock the frame upward with your right hand and pull the front backward and together in one motion so the wheels meet and the magnet catches. To make the bike more compact, 1) open the seat post quick release and push the seat post into the frame, 2) fol...

  • Page 6: Roll When Folded

    If mode owner manual 6 roll when folded the handle on top of the front fork can be used as a hand hold to roll the bike along during transport. Caution! Never place your hands and fingers inside the following folding part / mechanism..