Summary of IF Reach
Page 1
If reach owner manual if reach owner manual.
Page 2
If reach owner manual features • based on our performance reach compact folding bike, with added patented if folding mechanism. • a folding bike with standard geometry and riding position. • single-action, 5-second fold, no tools required and no parts need to be removed. • folds as small as a foldin...
Page 3: Caution!
If reach owner manual 3 caution! Never place your hands and fingers inside the following folding part / mechanism..
Page 4: Assembly Procedures
If reach owner manual assembly procedures step 1: opening the box – (1) a 99% assembled if reach, (2) seat / seat post, (3) pedals. 4.
Page 5: Step 2:
If reach owner manual step 2: with if reach on your, begin by raising the handle bars to close the stem hinge. Secure the stem hinge by rotating the locking lever toward the stem. Note: be sure to check the stem hinge is locked in place and secure. 5.
Page 6: Step 3:
If reach owner manual step 3: to unfold the if reach; place your left hand on the handle bar left grip with right hand holding the top tube near the seat tube. Move your right hand away from you and then back in a clockwise motion and your left hand slightly pushing the frame forward. 6.
Page 7: Step 3 (Continued):
If reach owner manual step 3 (continued): use your right palm to push the top tube by the seat tube to put the frame into position. Secure the frame together by rotating the frame locking lever forward and down into the front connector. Securely lock the locking lever in place by securing the quick ...
Page 8: Step 5:
If reach owner manual step 5: install the pedals. Turn the right pedal clock-wise and the left pedal counterclockwise to tighten. 8 step 4: insert seat post to seat tube and clamp. Assemble the seat onto seat post. Note: do not raise the seat post higher than the minimum insertion mark (the upper on...
Page 9: How To Fold.
If reach owner manual how to fold. Press pedals outer body inward toward frame and rotate body upward to fold compact. While standing on the left side of the bike; open the quick release lever. With an open hand press the locking lever toward the frame and upward. Rotate the locking lever toward the...
Page 10: How To Fold ..
If reach owner manual 10 how to fold .. Begin with your left hand on the left handle bar grip and your right hand on the saddle. The frame will hinge open by pulling your left hand toward you and either pushing away with your right hand or holding the rear in place. Rock the frame upward with your r...
Page 11: How To Fold …
If reach owner manual 11 how to fold … to make the bike more compact open the seat post quick release and push the seat post into the frame. Fold the handle bar to the side by opening the stem locking lever. Rotate the lever rearward to release. Return the stem locking lever back forward against the...
Page 12
If reach owner manual 12 roll when folded / sit the bike the frame hinge can be used as a hand hold to roll the bike along during transport. The saddle can also be used as a hand hold to roll the bike along during transport. To rest the frame on the ground; lower frame so the front wheel, rear wheel...
Page 13: How To Unfold
If reach owner manual 13 how to unfold reposition the handle bar raising the handle bars to close the stem hinge. Secure the stem hinge by rotating the locking lever toward the stem. To unfold the if reach; place your left hand on the handle bar left grip with right hand holding the saddle. Move you...
Page 14: How To Unfold …
If reach owner manual how to unfold … secure the frame together by rotating the frame locking lever forward and down into the front connector. Caution: keep your hand away from folding areas! Note: do not grasp the rod when rotating, possible fingers trapping. Securely lock the locking lever in plac...