Reach city(trekking) owner manual reach city(trekking) owner manual.
Reach city(trekking) owner manual reach features • the riding geometry of full sized city/trekking bikes. • the gear ratio of full sized city/trekking bikes - 37~102 inch. • effective front and rear suspension. • rigid small wheels for agile acceleration and fast stopping. • small front area for bet...
Reach city(trekking) owner manual specification frame built of al7005 t6 aluminum, rigid front triangle and rear swing arm with rear shock front fork built of al7005 t6 aluminum, trailing link suspension seat post promax sp-228 31.6mm tires/tubes primo comet 20x 1 3/8(37-451) rims alex vp-15f 451x15...
Reach city(trekking) owner manual assembly procedures step 1: unpack the box – (1) a 90% assembled reach, (2) stem, (3) stem raiser, (4) seat / seat post, (5) front wheel / qr, and (6) pedals. 4.
Reach city(trekking) owner manual step 2: assemble the stem to the gooseneck, and insert the stem raiser into the head tube, adjust the handlebar height and alignment, close the qr lever on top of the stem. Note: do not raise the seat higher than the minimum insertion mark. 5.
Reach city(trekking) owner manual step 3: assemble the saddle and seat post, insert the seat post into the seat tube, and close the seat clamp qr lever. 6 note: do not raise the seat post higher than the minimum insertion mark (the upper one)..
Reach city(trekking) owner manual step 4: slide the front wheel into the front fork with both ends of hub sitting on the dropouts. Insert the hub skewer into the front hub. Let the qr lever on the left side of you. Align the center of the wheel. Close the qr lever at proper tightness. Hook the brake...
Reach city(trekking) owner manual step 5: assemble the pedals into the cranks. 8 step 6: adjust the height and alignment of seat post and handlebar. Note: do not raise the seat and handlebar over the minimum insertion mark..
Reach city(trekking) owner manual accessories: front and rear carriers, kickstand 9 note: do no put over 25kg of luggage on the carriers..
Reach city(trekking) owner manual 10 how to fold level 1. Take off the front carrier(optional). Remove front wheel and seat. Open the qr and swing the rear swing arm to get the rear wheel into the front fork.* pull out the handlebar stem. Stand the bicycle on the rear carrier(optional) or put it int...
Reach city(trekking) owner manual 11 how to fold level 2. Remove the fenders and rear carrier(optional). Take off the rear wheel; pack the bike in a carrying bag(optional) for travel..
