Pacific Ears T Series Live! Instructions For Use

Care and Maintenance of your ACS In-Ear Monitors

It is important that you read these notes to ensure longevity 

of your custom in-ear monitors. Cleaning them regularly 

and paying close attention to their maintenance is vital to 

ensure their continued performance. We offer full cleaning 

and reconditioning services for your monitors so please don’t 

hesitate to call if your monitors need attention.

Cleaning and Storage

Use a moist cloth or sterile wipe to clean the silicone 

moulds and cables. Do not allow any moisture into 

the cable connections when cleaning. Do not immerse 

any part of the monitors in any liquid. Do not get your 

monitors wet. Please use the enclosed dehumidifier 

following each use (instructions enclosed) to ensure that 

your monitors remain free from moisture and store them 

in the pouch and hard case supplied when not in use.

Visually inspect the sound ports on each earpiece 

after use to check that no wax, skin debris or dirt has 

penetrated the tubes. Use the wax pick provided to 

carefully remove any matter.

NOTE : The most common cause of monitor failure is 

ingression of ear wax or sweat into the sound tubes. This 

is easily prevented by regular checks, cleaning and use 

of the dehumidifier.

If you need to replace your cable

Your cable is serviceable and may be replaced in 

the event of failure. Each plug has a coloured dot 

that corresponds to the colour coding on your 

earpieces. To connect your cable, present the 

plug to the cable inlet with the dot oriented to 

the flat face of your earpiece (fig 5). Push the plug 

into the mould (fig 6), press the plug home into the 

socket in the mould (fig 7). If required gently press 

onto the plug through the silicone to ensure that it is 

properly seated in the connector.

Fitting

Your monitors are handed, the right earpiece being identified with a red detail and 

the left earpiece with a blue detail. From a comfort and acoustic perspective, it is 

important that they are fitted correctly to provide a good seal of the ear.

Begin by placing the tip of the monitor into your 

ear canal (fig 1) whilst at the same time twisting 

gently backwards (fig 2). It is sometimes easier to 

use both hands when fitting the earpieces making 

sure that the top part of the mould is located 

under the flap of skin at the top of the ear (fig 3). 

Gently press the mould until it feels located and 

secure (fig 4). Use the comfort cream to help the 

fitting initially and create a good seal if required. 

Spread a small amount around the ear canal tip, 

being careful to avoid the sound tubes.

We want you to be delighted with your ACS in-ear 

monitors. If, for any reason, you experience difficulties 

or are not satisfied with your product or the service 

you receive from us please let us know by calling our 

customer services team on 

1300 90 50 10 .

fig 1

fig 3

fig 2

fig 4

fig 5

fig 6

fig 7

Live!-Instructions-V1.indd   1

13/12/2011   09:53