120315-40 espr.Bodya 5056.201-a installer: leave this manual with the appliance. Consumer: retain this manual for future reference. Warning: if the information in these instructions is not followed exactly a fire or explosion may result causing property damage, personal injury or death. For your saf...
120315-40 2 espr.Bodya 5056.201-a important note for the commonwealth of massachusetts: from massachusetts rules and regulations 248 cmr 5.08: (a) for all side wall horizontally vented gas fuelled equipment installed in every dwelling, building or structure used in whole or in part for residential p...
5056.201-a espr.Bodya 3 120315-40 table of contents note for massachucettes ................................... 2 caution .............................................................. 4 safety ................................................................ 5 owners information first fire ............
120315-40 4 espr.Bodya 5056.201-a for your safety - do not install or operate your pacific energy fireplace without first reading and understanding this manual. Any installation or operational deviation from the following instructions voids the pacific energy warranty and may prove hazardous. This a...
5056.201-a espr.Bodya 5 120315-40 • due to high temperatures, this gas appliance should be located out of traffic and away from furniture and draperies. • children and adults should be alerted to the hazards of high surface temperatures and should stay away to avoid burns or clothing ignition. • you...
120315-40 6 espr.Bodya 5056.201-a owner’s information congratulations on your purchase of a pacific energy gas fireplace. Your fireplace has been professionally installed by: dealer name: ______________________________ phone number: ____________________________ if you discover any problems with your...
5056.201-a espr.Bodya 7 120315-40 owner’s information ` remote control operation system description the proflame2 remote control system consists of three elements: 1. Proflame2 remote transmitter. 2. Proflame2 integrated fireplace control (ifc) module. 3. A wiring harness to connect the ifc to the g...
120315-40 8 espr.Bodya 5056.201-a owner’s information ifc module the proflame2 integrated fireplace control (ifc) module is a device that allows automatic ignition and pilot flame supervision, and commands the functions of the hearth heater. It’s configured to control the on/off main burner operatio...
5056.201-a espr.Bodya 9 120315-40 owner’s information temperature indication display with the system in the “off” position, press the thermostat key and the mode key at the same time. Look at the lcd screen on the transmitter to verify that a c or f is visible to the right of the room temperature di...
120315-40 10 espr.Bodya 5056.201-a owner’s information figure 9: figure 10 figure 11: smart flame function figure 12 remote flame control the proflame2 has six (6) flame levels. With the system turned on, and the flame level at maximum in the fireplace, press the down arrow key once to reduce the fl...
5056.201-a espr.Bodya 11 120315-40 owner’s information comfort fan speed control if the fireplace is equipped with a hot air circulating fan, the speed of the fan can be controlled by the proflame system. The fan speed can be adjusted through six (6) speeds. To activate this function use the mode ke...
120315-40 12 espr.Bodya 5056.201-a owner’s information low battery power detection transmitter the life span of the remote control batteries depends on various factors: quality of the batteries used, the number of ignitions of the appliance, the number of changes to the room thermostat set point, et...
5056.201-a espr.Bodya 13 120315-40 owner’s information maintenance turn off gas and electrical power supply (if applicable) and allow ample time for unit to cool before servicing appliance. It is recommended that the fireplace and its venting should be inspected at least once a year by a qualified s...
120315-40 14 espr.Bodya 5056.201-a owner’s information a) check that the vent pipe and vent terminal are open and free from blockage or debris. If the venting is disassembled for cleaning, it must be properly assembled and re-sealed. Refer to venting section for proper procedure. B) check glass pane...
5056.201-a espr.Bodya 15 120315-40 owner’s information lighting instructions.
120315-40 16 espr.Bodya 5056.201-a installer information fireplace dimensions fig. 18: fireplace dimensions fig. 17: framing the installation must conform with local codes or, in the absence of local codes, with the national fuel gas code, ansi z223.1/nfpa 54, or the national gas and propane install...
5056.201-a espr.Bodya 17 120315-40 installer informatio n fig. 19: framing at the corner fig. 20: minimum clearance corner framing.
120315-40 18 espr.Bodya 5056.201-a installer information fireplace dimensions clearances to combustibles figure 21: minimum distance from top of the glass to ceiling figure 22: front and side definitions front of the appliance is an open side of the combustion chamber covered with the glass. Facing ...
5056.201-a espr.Bodya 19 120315-40 installer informatio n locating the fireplace in planning the installation for the fireplace, it is necessary to determine where the unit is to be installed, location of vent system and where gas supply piping may be plumbed. Various installations are possible, suc...
120315-40 20 espr.Bodya 5056.201-a installer information fireplace dimensions installation 1. Fasten the surround base to the fireplace using supplied screws and mounting holes located along the inner edge of the base. 2. Install screen with the frame in slots on inner side of the surround base. 3. ...
5056.201-a espr.Bodya 21 120315-40 installer informatio n venting note: the intake damper positions specified in this chart were set in a controlled testing environment, and serve as a general guideline for installations. Every venting configuration is different, and the damper setting may need slig...
120315-40 22 espr.Bodya 5056.201-a installer information fireplace dimensions this fireplace is certified for use with 4” x 6-5/8”coaxial venting components only. It is permitted to only use certified venting for this appliance. Vent terminal minimum clearances.
5056.201-a espr.Bodya 23 120315-40 installer informatio n note: mixing venting components from different manufacturers is inadvisable. Venting components figure 1: 4”x6-5/8" rigid piping cross reference chart figure 29: 4”x6-5/8" rigid piping cross reference chart figure 30: 4”x6-5/8" rigid pipe com...
120315-40 24 espr.Bodya 5056.201-a installer information fireplace dimensions plumbing and electrical figure 31: gas connection electrical connection open the access panel as seen in figure 31a and connect the line wires to the supplied wires inside the junction box using marrettes. A licensed elect...
5056.201-a espr.Bodya 25 120315-40 installer informatio n servicing of the appliance can be performed from the front of the unit by removing the door and the burner tray from the unit. Caution: the gas line should be installed by a qualified service person in accordance with all building codes. This...
120315-40 26 espr.Bodya 5056.201-a installer information fireplace dimensions gas pressure testing procedure note: to test the gas pressure, turn off the gas supply to the appliance before loosening test point screws. Verify gas pressures with the fireplace lit and at the highest setting. 1. Remove ...
5056.201-a espr.Bodya 27 120315-40 installer informatio n propane conversion before starting the conversion make sure to shut off the gas supply to the unit and allow fireplace to cool to room temperature. To convert the gas fireplace from natural gas to propane the kit is required. This kit comes w...
120315-40 28 espr.Bodya 5056.201-a installer information fireplace dimensions door installation/removal installation 1. Place the door in the slot at the bottom of the firebox opening. 2. Hold the door against the firebox. Push 3 levers at the top of the door to secure the door. Removal 1. Hold the ...
5056.201-a espr.Bodya 29 120315-40 installer informatio n figure 40: back panel figure 41: side panel figure 42: baffle mounts figure 39: panel set fan removal before fireplace installation. 1. Remove fan panel at the rear side of the fireplace as seen in figure 38. 2. Disconnect fan electrical wire...
120315-40 30 espr.Bodya 5056.201-a installer information fireplace dimensions figure 45: ember placement figure 43: burner tray burner and tray installation / removal burner tray installation / removal installation place the burner tray in the fireplace. Turn off main gas supply to unit and connect ...
5056.201-a espr.Bodya 31 120315-40 installer informatio n log set installation / removal figure 47: two rear logs figure 48: rear log set figure 49: left side log figure 50: front logs figure 46: log set place the logs #1 and #2 as seen in fig.47 than place log #3 over dowel pin on log #2 as seen in...
120315-40 32 espr.Bodya 5056.201-a installer information fireplace dimensions glass burner kit installation / removal glass installation to install the glass, evenly spread a thin layer of crushed glass across the entire burner pan as seen in figure 53. )) to install the optional rock set, simply pl...
5056.201-a espr.Bodya 33 120315-40 installer informatio n intake air damper installation the esprit fireplaces come with the damper that can limit the flow of intake air. This damper is located behind the air baffle at the top of the inner firebox. Sometimes on installations that involve vertical ve...
120315-40 34 espr.Bodya 5056.201-a installer information fireplace dimensions esprit linear gas fireplace sales codes unit esprit linear gas fireplace ...................................... Espr.Bodya replacement parts esprit replacement door with glass ................... Espr.Doora esprit replacem...
5056.201-a espr.Bodya 35 120315-40 installer informatio n caution: label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing. Wiring diagram fig 56.
120315-40 36 espr.Bodya 5056.201-a installer information fireplace dimensions esprit rating label.
5056.201-a espr.Bodya 37 120315-40 installer informatio n notes: ________________________________________________________________________________ ________________________________________________________________________________ _________________________________________________________________________...
120315-40 38 espr.Bodya 5056.201-a installer information fireplace dimensions ________________________________________________________________________________ ________________________________________________________________________________ ____________________________________________________________...
5056.201-a espr.Bodya 39 120315-40 installer informatio n.
? 2015 copyright pacific energy fireplace products ltd reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. For technical support, please contact your retailer web site: www. Pacificenergy.Net 2975 allenby rd., duncan, b...
