Pacific Energy TRENTON A Installation And Operating Instructions Manual - Lighting Instructions

Manual is about: A series FREESTANDING GAS STOVE

Summary of TRENTON A

  • Page 1

    Warning: if the information in these instructions is not followed exactly, a fi re or explosion may result causing property damage, personal injury or death. This appliance may be installed in an aftermarket permanently located, manufactured home (usa only) or mobile home, where not prohibited by lo...

  • Page 2: Danger

    2 5055.45-a 160615-44 trnt.Bodya hot glass will cause burns. Do not touch glass until cooled. Never allow children to touch glass. ! Danger a barrier designed to reduce the risk of burns from the hot viewing glass is provided with the appliance and shall be installed for the protection of children a...

  • Page 3

    3 trnt.Bodya 5055.45-a 160615-44 important note for the commonwealth of massachusetts: from massachusetts rules and regulations 248 cmr 5.08: (a) for all side wall horizontally vented gas fueled equipment installed in every dwelling, building or structure used in whole or in part for residential pur...

  • Page 4: Caution

    4 5055.45-a 160615-44 trnt.Bodya congratulations on your purchase of a pacific energy gas stove. Your free-standing gas stove has been professionally installed by: dealer name: ___________________________________ phone number: _________________________________ i f you discover any problems with your...

  • Page 5: First Fire

    5 trnt.Bodya 5055.45-a 160615-44 when lit for the first time, the gas stove will emit a slight odor for a couple of hours. This is due to the curing of paints, sealants, gaskets, and lubricants used in the manufacturing process. This condition is temporary. Open doors and windows to ventilate the ar...

  • Page 6: Manufactured (Mobile) Homes

    6 5055.45-a 160615-44 trnt.Bodya manufactured (mobile) homes in some jurisdictions, the trenton gas stove may be installed in manufactured homes after the “first sale”. Consult local codes for approval. The gas stove must be fastened in place. Install in accordance with the current standard mobile h...

  • Page 7: Remote Control System

    7 trnt.Bodya 5055.45-a 160615-44 the profl ame remote control system consists of three elements: 1. Profl ame remote transmitter. 2. Profl ame integrated fireplace control (ifc) module. 3. A wiring harness to connect the ifc to the gas valve and stepper motor. Fig. 1: profl ame remote transmitter bl...

  • Page 8

    8 5055.45-a 160615-44 trnt.Bodya temperature indication display with the remote transmitter in the “off” position, press the thermostat key and the mode key at the same time. Look at the lcd screen on the remote transmitter to verify that a c or f is visible to the right of the room temperature disp...

  • Page 9

    9 trnt.Bodya 5055.45-a 160615-44 remote flame control the proflame has six (6) flame levels. With the system turned on, and the flame level at maximum in the gas stove, press the down arrow key once to reduce the flame height by one step until the flame is turned off. The up arrow key will increase ...

  • Page 10

    10 5055.45-a 160615-44 trnt.Bodya comfort fan speed control if the gas stove is equipped with a hot air circulating fan, the speed of the fan can be controlled by the profl ame system. The fan speed can be adjusted through six (6) speeds. To activate this function use the mode key (fig. 1) to index ...

  • Page 11: Warnings and Cautions

    11 trnt.Bodya 5055.45-a 160615-44 owners information low battery power detection remote transmitter the life span of the remote control batteries depends on various factors: quality of the batteries used, the number of ignitions of the gas stove, the number of changes to the room thermostat set poin...

  • Page 12: Maintenance

    12 5055.45-a 160615-44 trnt.Bodya owners information turn off gas and electrical power supply (if applicable) and allow ample time for the gas stove to cool before servicing gas stove. It is recommended that the gas stove and its venting should be inspected at least once a year by a qualified servic...

  • Page 13: Lighting Instructions

    13 trnt.Bodya 5055.45-a 160615-44 for your safety read before lighting lighting instructions to turn off gas appliance warning: if you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life. A. This appliance is equipped with...

  • Page 14: Trenton Gas Stove Dimensions

    14 5055.45-a 160615-44 trnt.Bodya installer information trenton gas stove dimensions fig. 21: gas stove dimensions 21 15/16” 30 5/8” 26 3/4” dimensions height 30 5/8 inches width 26 3/4 inches depth 21 15/16 inches height of flue outlet 24 inches 24”.

  • Page 15: Clearances to Combustibles

    15 trnt.Bodya 5055.45-a 160615-44 installer information clearances to combustibles minimum clearance to combustible materials interior side wall 4” interior back wall 4 “ interior ceiling 18” in front of gas stove 36” venting pipe clearance 1” diagonal corner to wall 2" 4” 4” 2” examples of common l...

  • Page 16: Vent Terminal Clearances

    16 5055.45-a 160615-44 trnt.Bodya m k i a v g g h a j v g a b c a v v a v b f b l v e v v v d a= *12 inches (30 cm) min. Clearances above grade, veranda, porch, deck, or balcony b= *12 inches (30 cm) min. Clearance to window or door that may be opened c= 12 inches (30 cm) min. Clearance to permanent...

  • Page 17

    17 trnt.Bodya 5055.45-a 160615-44 installer information note: the vent must not exceed a total length of 35 feet. Any combination of rise and run may be used but must be constrained to the boundaries of this chart. A maximum of three (3) 90° elbows may be used. Only one (1) 90° elbow or combination ...

  • Page 18: Co-Linear Venting

    18 5055.45-a 160615-44 trnt.Bodya only certifi ed venting systems or components may be installed with this fi replace. 1. Measure chimney height, cut fl ex liner (min.10’ to termination) as required. Mark one pipe at both ends to identify combustion air intake pipe from fl ue outlet pipe. 2. Attach ...

  • Page 19: Venting Components

    19 trnt.Bodya 5055.45-a 160615-44 venting components installer information note: mixing venting components from different manufacturers is inadvisable. Fig. 27: 4” x 6⅝” rigid piping cross reference chart fig. 28: 4” x 6⅝” rigid pipe components cross reference chart.

  • Page 20

    20 5055.45-a 160615-44 trnt.Bodya fig. 30: details of rear side of trenton left blower fan ifc module right blower fan battery bay electrical connection gas connection gas valve trenton gas stove rear component this gas stove is certified for use with 4” x 6⅝”coaxial venting components only. It is p...

  • Page 21: Gas Connection

    21 trnt.Bodya 5055.45-a 160615-44 gas connection to make the required electrical and gas connections, start by positioning the gas stove. Connect the gas supply line (not included) to the ⅜” fl are fi tting at the rear of the unit as seen in fig. 31. Please see the gas supply section (page 32) of th...

  • Page 22: Packaging

    22 5055.45-a 160615-44 trnt.Bodya packaging the trenton gas stove comes with the ceramic panels and gas burner already installed. The log set and glowing embers are packaged in protective styrofoam and secured in place by the glass door and screen. The glass door and screen must be removed before th...

  • Page 23: Log Set Pieces

    23 trnt.Bodya 5055.45-a 160615-44 1. Remove the mesh screen as described on page 22. 2. Remove the wing nut bolts (fig.36) holding the glass door retainer frame to the gas stove frame and tilt the glass door so that it can be removed (fig. 37) 3. Remove the glass door together with the retainer fram...

  • Page 24: Installation Of Log Set

    24 5055.45-a 160615-44 trnt.Bodya installation of log set 1. Fill burner basket (fig. 41) with embers so that the baskets are filled and overflowing the burners’ front row (fig. 42). Reserve a small amount of embers for final placement. 2. Place first log onto the ledge in the firebox taking care th...

  • Page 25

    25 trnt.Bodya 5055.45-a 160615-44 fig. 45: 3rd log placement fig. 46: 4th log placement 5. Place 4th log as shown in fig. 46. The black charcoal side of the piece must face inwards. This log will act as a support for the final log. Fig. 47: 5th log placement 6. Place 5th log as shown in fig. 47 maki...

  • Page 26: Glass Door Installation

    26 5055.45-a 160615-44 trnt.Bodya fig. 48: back row of burner. Fig. 48 shows the burners’ back row as not being covered by the logs. At this time, the small amount of embers reserved at the beginning of log placement can be used to fill any left over spaces. Note: although it is permisable to place ...

  • Page 27: Screen Mesh Installation

    27 trnt.Bodya 5055.45-a 160615-44 screen mesh installation the screen mesh is positioned between the glass door and the doors. It's purpose is to provide protection from the heat radiating from the glass door. The screen has a front side and a rear side and must be oriented correctly for a proper fi...

  • Page 28

    28 5055.45-a 160615-44 trnt.Bodya the bottom edge of the screen mesh must fi t fi rmly into the channel provided for it in the fi re box frame. Fig. 56 shows the location of the screen mesh channel. Fire box side door side fig. 56: screen mesh location channel the screen mesh top holder (fig. 57) po...

  • Page 29: Down Before Changing.

    29 trnt.Bodya 5055.45-a 160615-44 the trenton gas stove comes with an assortment of glass plates of various colours. Accent lighting is controlled via the remote control transmitter included with the trenton gas stove. The glass plate tray is located underneath the trenton (fig: 59) and is held in p...

  • Page 30: Operating Procedure

    30 5055.45-a 160615-44 trnt.Bodya 1. Install 4 aa batteries into the trenton battery holder (fig: 64) located on the rear side of the trenton. Install the on/off switch cover (fig: 64) over top of the battery bay. Make sure that the selection switch is on the “remote” setting. 2. Install 3 aaa batte...

  • Page 31: Burner Installation

    31 trnt.Bodya 5055.45-a 160615-44 burner installation burner installation/removal installation fit the burner over the orifice (fig. 68 & 69) and set so that the screw holes on both sides of the burner are making full contact with the back panel (fig. 70). Fig. 68: orifice fig. 69: burner insertion ...

  • Page 32: Gas Pressure Requirements

    32 5055.45-a 160615-44 trnt.Bodya servicing of the gas stove can be performed from the rear of the unit by removing the access panel from the unit. Caution: the gas line should be installed by a qualified service person in accordance with all building codes. This section is intended as a guide for q...

  • Page 33: Pilot Flame Adjustment

    33 trnt.Bodya 5055.45-a 160615-44 note: to test the gas pressure, turn off the gas supply to the gas stove before loosening test point screws. Verify gas pressures with the gas stove lit and at the highest setting. 1. Remove back panel and locate the valve as seen in fig. 73. 2. Locate the inlet and...

  • Page 34: Propane Conversion

    34 5055.45-a 160615-44 trnt.Bodya before starting the conversion make sure to shut off the gas supply to the unit and allow gas stove to cool to room temperature. To convert the gas stove from natural gas to propane the (trtn.Lpkita) kit is required. This kit comes with new pilot and burner orifi ce...

  • Page 35: Fan Replacement

    35 trnt.Bodya 5055.45-a 160615-44 fan replacement removal 1. Turn off the main gas supply to gas stove and disconnect the gas supply from the ⅜” flare fitting. Also, disconnect the power cord from the unit. 2. Remove rear cover to gain access to the fans. 3. Remove the three (3) screws from the pane...

  • Page 36: Fire Box Panel Installation

    36 5055.45-a 160615-44 trnt.Bodya fire box panel installation 1. Insert back panel so that it is sitting on the ledge at the back of the fi rebox as shown in fig: 82. 2. Insert side panels so that they are sitting on top of the lower back panel ledge as shown in fig.: 83. 3. Insert fi rst side panel...

  • Page 37: Door Removal

    37 trnt.Bodya 5055.45-a 160615-44 door removal fig. 88: door hinges in place fig. 89: door removed door is removed from gas stove by simply lifting each of the two doors up and off of its hinges. Cladding removal/replacement trenton cladding panels can be removed and replaced with different styles a...

  • Page 38: Removal Instructions

    38 5055.45-a 160615-44 trnt.Bodya removal instructions 1. Remove the top cover which is sitting - unfastened on top of the trenton (fig. 92). Take care when lifting the top cover so that the lattice insert does not fall off, or remove insert before removing the top cover. 2. The screen mesh and glas...

  • Page 39: Installation Instructions

    39 trnt.Bodya 5055.45-a 160615-44 fig. 98: removing front panel installation instructions install the panels in the reverse order in which they were removed. Be sure that the 4 rectangular plates on the front panel (fig. 102) are left loose when mounting the front panel. These plates hook onto the s...

  • Page 40: Replacement Parts

    40 5055.45-a 160615-44 trnt.Bodya replacement parts trenton sales codes description sales code trenton unit complete trnt.Bodya optional trenton lp conversion kit trnt.Lpkita replacement trenton door with glass trnt.Doora trenton screen trnt.Scrna trenton control tray complete trnt.Cnttray trenton p...

  • Page 41: Wiring Diagram

    41 trnt.Bodya 5055.45-a 160615-44 wiring diagram caution: label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing. Fig. 103 : trenton wiring diagram installer information lamp comfort fan pilot ...

  • Page 42: Rating Label

    42 5055.45-a 160615-44 trnt.Bodya rating label the rating label - as shown - is located on the rear of the gas stove. Installer information.

  • Page 43

    43 trnt.Bodya 5055.45-a 160615-44 installer information.

  • Page 44

    ? 2015 copyright pacific energy fireplace products ltd reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. For technical support, please contact your retailer web site: www. Pacificenergy.Net 2975 allenby rd., duncan, b...