Pacific FURY 20BB Operating & Maintenance Instructions

Manual is about: 20” Battery Burnisher

Summary of FURY 20BB

  • Page 1

    Fury 20bb 20” battery burnisher read this book this operator’s book has important information for the use and safe operation of this machine. Read this book care- fully before starting the machine. Keep this book and tell all operators to read the book. If you do not follow the instruc- tions, you c...

  • Page 2

    Important safety instructions read and understand all warnings and instructions before using this machine! Warning! To reduce the risk of fire, electric shock, or injury: 1. You must have training in the operation of the machine before using it. Read the instruction book and charger manual. If you d...

  • Page 3: Operating Instructions

    To prepare the machine for operation, make sure the batteries are charged and the machine is properly as- sembled. If in doubt, ask your supervisor. Be prepared by having your floor area cleared and ready for the fast action of a burnisher. Prepare the floor area by sweeping, dusting or mopping as n...

  • Page 4

    Preventative maintenance warning! Always move the on/off switch to the off position (pushed all the way down) before performing any service, maintenance, pad changing or inspection of the machine. After each use: 1. Empty the filter bag 2. Check the filter bag for rips. 3. Remove the pad and clean t...

  • Page 5: Fury 20Bb Final Assembly

    Fury 20bb final assembly 5 523603 skirt (1) not shown (items to attach skirt): 528001 strap-skirt (1) 962186 screw-10-32x1-1/8 (1) w107d washer-3/16 flat sae (2) 920001 nut-10-32 nyloc stop (1) 521901 chassis base (1) 524501 shroud (1) 522307 chassis cover (1).

  • Page 6: Fury 20Bb Battery Assembly

    Not shown: 862411 charger-36v/25 amp (1) 861307 battery-215ah 12v (3) 6 911607 cable set-battery connector (1) fury 20bb battery assembly.

  • Page 7

    525008 knob-red, on/off (1) not shown: 911587 switch-on/off (1) fury 20bb side cooling guard assembly 7 fury 20bb side control panel assembly 523602 guard-cooling fan (2) (one on each side of unit) 962360 screw-10-32x1/2 lg (8) (four on each side of unit) 525009 knob-height adjustment (1) 911574 met...

  • Page 8

    8 fury 20bb motor & dust control assembly 253306 fitting-pipe (1) 523603 skirt (1) not shown (items to attach skirt): 528001 strap-skirt (1) 962186 screw-10-32x1-1/8 (1) w107d washer-3/16 flat sae (2) 920001 nut-10-32 nyloc stop (1) 524501 shroud (1) 525209 motor-2.5hp (1) - units built after 9/2010...

  • Page 9

    Hardware to mount flange to motor: 962022 screw-3/8-16x1 hh (4) 980009 washer-3/8 lock (4) fury 20bb pad driver assembly 9 not shown: 915002 key (1) 962073 screw-set (1) hardware to mount flange to shroud: 962048 screw-3/8-16x1-1/4 hh (3) 980007 washer-5/16 flat (3) 980009 washer-3/8 lock (3) 523307...

  • Page 10: Fury 20Bb Switch Assembly

    10 fury 20bb switch assembly 962010 screw-1/4-20x1 (3) 980004 washer-1/4 flat (4) 920004 nut-1/4-20 hex (1) 911561 switch-pad activation (1) not shown: 911573 spacer-switch (2) w132d screw-6-32x3/4 php ss (2) 525011 switch spring kit (1) 256721 drive pin (2) 962161 screw-10x3/4 php (5) 911591 switch...

  • Page 11

    Fury 20bb panel assembly (close up) 11 911297 solenoid-dc contactor (1) w102d screw-1/4-20x5/8 php (2) w104d washer-1/4 flat (2) 920011 nut-1/4-20 elastic stop (2) 528542 shunt-mounted (1) 962003 screw-10-32x3/4 php (2) 920001 nut-10-32 nyloc (2) 525113 lift handle (1) 525112 bracket-lift handle (1)...

  • Page 12

    Fury 20bb panel & lever assembly parts list 12 962454 screw-1/4-20x1/2 (4) 526605 latch plate (1) 527008 cover panel (1) 962222 screw-10-32x1/2 (6) 525111 rod lever (1) 525110 lift lever (1) 528104 shrink wrap- per inch (7) 528102 sleeve-pressure (1) 528304 spring (3) w353d screw-1/4-20x5/8 (3) 9110...

  • Page 13: Fury 20Bb Frame Assembly

    Fury 20bb frame assembly 13 962207 screw-1/2-13x3/4 hex (2) 525109 lift weldment (1) w120d washer-1/2 flat (12) 962207 screw-1/2-13x3/4 hex (4) 520808 axle mount bracket (2) 520507 axle (1) 529790 wheel-8” (2) not shown: 962349 screw-3/8-16x5/8 hex (2) 980103 washer-3/8 (2) 521190 bushing (2).

  • Page 14

    14 529704 caster-4” (1) 962207 screw-1/2-13x3/4 hex (2) 521190 bushing (2) fury 20bb rear caster & cooling vent assembly below image is the rear, underside of the chassis with the unit flipped forward 962360 screw-hex hd, self tapping (4) 523602 guard-cooling fan (1) 962022 screw-3/8-16x1 hh (4) 980...

  • Page 15: Fury 20Bb Wiring Diagram

    15 fury 20bb wiring diagram.

  • Page 16

    Warranty policy fury 20bb 20” battery burnisher the pacific fury 20bb battery burnisher has been manufactured, tested and inspected in accordance with specific engineering requirements and is warranted to be free from defects in workmanship and materials as follows from the date of purchase to the o...