Pacific GENIUS 14 Operating & Maintenance Instructions

Summary of GENIUS 14

  • Page 1

    Genius 14 genius 18 read this book this operator’s book has important information for the use and safe operation of this machine. Read this book care- fully before starting the machine. Keep this book and tell all operators to read the book. If you do not follow the instructions, you can cause an in...

  • Page 2

    This machine must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric cur- rent to reduce the risk of electric shock. This machine is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be inserted...

  • Page 3: Operating Procedures

    3 operating procedures warning! For the safe operation of this machine follow the instructions given in this booklet and the training given by your supervi- sor. Failure to do so can result in personal injury and/or damage to machine and property! Do not operate machine in an explosive environment! ...

  • Page 4: Maintenance

    Vacuum inlet filter this machine has a vacuum inlet filter (drawing 1, item 69) that will require periodic cleaning or replacement. The filter is located below the paper bag cage in the housing. To clean: remove the filter and shake or vacuum it. If the filter is worn or uncleanable, replace. Hepa f...

  • Page 5: Notes

    Notes 5.

  • Page 6: Tank & Vacuum Assembly

    6 tank & vacuum assembly 1 2 3 4 5 6 1 0 1 2 1 4 11 1 3 1 5 1 6 1 7 1 8 9 8 1 9 2 0 2 2 2 1 2 3 2 9 2 4 2 5 2 7 3 2 2 8 2 6 3 1 3 7 3 0 3 3 3 4 3 5 3 6 3 8 3 9 4 0 4 2 4 3 4 4 4 1 4 6 4 5 4 7 4 8 4 9 5 0 5 1 5 2 5 3 5 4 5 5 5 6 5 7 5 8 5 9 6 3 6 2 6 0 6 1 6 5 6 4 6 6 6 7 6 8 7 0 7 4 6 9 7 3 7 2 7 1 ...

  • Page 7

    7 parts list - tank & vacuum assembly item part no. Description qty. 1 644120 hose assembly 1 2 908099 electric cable 1 3 643920 handle grip 1 4 964152 screw m3x20 2 5 cable clamp 1 6 964153 screw m4x12 1 7 648520 suction hose support 1 8 642320 top cover 1 9 648320 closing cover spring 1 10 646620 ...

  • Page 8: Brush Head Assembly

    8 brush head assembly 2 3 4 5 6 1 7 8 10 9 12 15 13 11 14 16 17 18 19 20 21 22 23 24 25 26 28 29 30 32 31 33 34 35 36 37 38 39 43 40 41 44 42 47 46 45 48 49 50 52 55 56 57 51.

  • Page 9

    9 parts list - brush head assembly item part no. Description qty. 1 645121 lens 2 2 642303 base cover 1 3 648502 swivel neck support wiring 2 4 641120 bushing 2 5 641121 bushing 2 6 642305 joint cover 1 7 964136 self-threading screw 3, 9x16 2 8 911255 wire on swivel neck 1 9 644901 swivel neck 1 10 ...

  • Page 10: Accessories

    10 1 2 3 4 accessories item part no. Description qty. 1 649001 tube-extension 1 2 648801 crevice tool 1 3 648802 dusting brush 1 4 640620 10 pack paper bags 1.

  • Page 11: Wiring Diagram

    11 wiring diagram 1 2 3 4 5 7 8 9 1 0 11 1 2 1 3 1 4 1 5 1 6 1 7 1 8 item part no. Description qty. 1 908099 electric cable 1 2 911193 switch 1 3 911257 lead assembly 1 4 911252 microswitch 1 5 911253 control card 1 7 911258 electric cable assembly 1 8 911259 terminal board mannut 1 9 625201 vacuum ...

  • Page 12

    Warranty policy pacific limited warranty the pacific genius 14 and genius 18 have been manufactured, tested and inspected in accordance with specific engineering requirements and is warranted to be free from defects in workmanship and materials as follows: three (3) years parts, one (1) year labor -...