Pacific Gulper 12P Operating & Maintenance Instructions

Manual is about: WET/DRY VACUUMS

Summary of Gulper 12P

  • Page 1

    Read this book this operator’s book has important information for the use and safe operation of this machine. Read this book care- fully before starting the machine. Keep this book and tell all operators to read the book. If you do not follow the instructions, you can cause an injury or damage equip...

  • Page 2

    Important safety instructions read and understand all warnings and instructions before using this machine! Warning! To reduce the risk of fire, electric shock, or injury: 1. You must be trained to operate this machine. This machine is to be operated for its intended use only. 2. Do not operate this ...

  • Page 3: Operating Procedures

    Operating procedures warning! For the safe operation of this machine follow the instructions given in this booklet and the training given by your supervisor. Failure to do so can result in personal injury and/or damage to machine and property! Do not operate machine in an explosive environment! Warn...

  • Page 4: Maintenance

    4 maintenance good maintenance procedures assure better operation, fewer repairs and longer life to your machine. Disconnect the electrical plug of the machine from the electrical outlet before doing any cleanup, repairs or maintenance of the machine and when leaving the machine unattended. Clean th...

  • Page 5

    5 tool kit part #608809 tool kit assembly: 1. Connect the hose to the collector tank by inserting the large, grooved hose adapter end into the tank adapter. Press the pawl (#35 on wet/dry vac) to allow the hose adapter to slide further in. Release the pawl to engage the large groove. 2. Insert the u...

  • Page 6

    6 pv-12 & pv-18 gulper 12p & 18p 1 2 3 4 6 7 8 9 11 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 43 44 45 40 51 52 53 54 55 56 57 58 59 60 58.

  • Page 7

    10/01 pv-12 & pv-18 gulper 12p & 18p item part no. Description qty. 1 601540 cap 1 2 608010 switch 1 3 602340 cover, motor 1 4 964022 screw, motor cover 8 6 serial plate 1 7 515150 warning label 1 8 608530 strain relief 1 9 908010 power cord, 16-3x35ft. - pv-12/12p 1 908034 power cord, 16-3x35 ft.- ...

  • Page 8

    8 pv-18s & pv-18d gulper 18ps & 18pd 1 2 3 4 6 7 8 9 11 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 43 44 45 51 52 53 54 55 56 40 57 58 59 60 58 10

  • Page 9

    9 pv-18s & pv-18d gulper 18ps & 18pd item part no. Description qty. 1 602370 cap 1 2 911089 switch 1 3 602770 cover, motor 1 4 960030 screw, motor cover 4 6 serial plate 1 7 515150 warning label 1 8 608530 strain relief 1 9 908012 power cord, 16-3x50ft. -pv-18s/18ps 1 908034 power cord, 16-3x35 ft.-...

  • Page 10

    10 squeegee assembly part #608521.

  • Page 11

    Squeegee assembly part #608521 11 item part no. Description qty. 1 960008 bolt, shoulder 2 2 609703 wheel 2 3 608506 squeegee channel weldment 1 4 920019 nut, 1/4-20 hex jam 3 5 w189d screw, 14-20x3/4 hh cs 2 6 a13018 knob 2 7 w506d screw,5/16-18x3/4 hh ms 6 8 w380d screw, 10-32x3/4 php 16 9 607209 ...

  • Page 12

    Warranty policy polyethylene wet/dry vacuums the pacific wet/dry vacuum has been manufactured, tested and inspected in accordance with specific engineering require- ments and is warranted to be free from defects in workmanship and materials as follows: five (5) years parts, one (1) year labor - poly...