Pacific Hydrostar 95591 Set Up And Operating Instructions Manual

Manual is about: VERTICAL FLOAT SUMP PUMP

Summary of 95591

  • Page 1

    Vertical float sump pump model model model 95591 - .75 hp 95592 - 1 hp 95593 - 1.5 hp set up and operating instructions diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed exclu...

  • Page 2: General Safety Rules

    Sku 95591/95592/95593 for technical questions, please call 1-800-444-3353 page 2 save this manual you will need this manual for the safety warnings and precautions, assem- bly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this ma...

  • Page 3

    Sku 95591/95592/95593 for technical questions, please call 1-800-444-3353 page 3 work area keep your work area clean and 1. Well lit. Cluttered benches and dark areas invite accidents. Do not operate power tools in 2. Explosive atmospheres, such as in the presence of flammable liquids, gases, or dus...

  • Page 4: Specific Safety Rules

    Sku 95591/95592/95593 for technical questions, please call 1-800-444-3353 page 4 tool use and care disconnect the power cord plug 1. From the power source before making any adjustments, changing accessories, or storing the sump pump. Such preventive safety mea- sures reduce the risk of starting the ...

  • Page 5

    Sku 95591/95592/95593 for technical questions, please call 1-800-444-3353 page 5 do not pump hazardous materials. 6. Do not pump explosive or flammable materials such as fuel, oil, kerosene, gasoline, etc. Do not pump in close proximity to flammable or explosive materials. Do not pump fats, oils, sa...

  • Page 6: Grounding

    Sku 95591/95592/95593 for technical questions, please call 1-800-444-3353 page 6 grounding to prevent electric shock and death from incorrect grounding wire connection: check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord ...

  • Page 7

    Sku 95591/95592/95593 for technical questions, please call 1-800-444-3353 page 7 double insulated tools may be used 2. In either of the 120 volt outlets shown in the preceding illustration. (see outlets for 2-prong plug.) extension cords grounded 1. Tools require a three wire extension cord. Double ...

  • Page 8: Unpacking

    Sku 95591/95592/95593 for technical questions, please call 1-800-444-3353 page 8 unpacking when unpacking, check to make sure all the parts shown on the parts list on page 12 are included. If any parts are missing or broken, please call harbor freight tools at the number shown on the cover of this m...

  • Page 9

    Sku 95591/95592/95593 for technical questions, please call 1-800-444-3353 page 9 to 115 volt, grounded gfci outlet 1/8” air bleed hole base (25) discharge pipe (not included) check valve or union (not included) figure e o 1-1/4” or 1-1/2” n pt pvc 3. Connect the discharge pipe to the base (25). Note...

  • Page 10

    Sku 95591/95592/95593 for technical questions, please call 1-800-444-3353 page 10 inspection, maintenance, and cleaning warning! Always shut off the electrical power to the gfci outlet first. Then, dis- connect the pump’s power cord & plug from the gfci outlet prior to performing any inspection, mai...

  • Page 11

    Sku 95591/95592/95593 for technical questions, please call 1-800-444-3353 page 11 to clean the impeller cover and impeller: 2. A clogged or dirty impeller cover or impeller (28) will greatly reduce performance of the pump. To clean the impel- ler cover (31), spray the cover with clean water. To clea...

  • Page 12: Parts List

    Sku 95591/95592/95593 for technical questions, please call 1-800-444-3353 page 12 please read the following carefully the manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any repres...

  • Page 13: Assembly Diagram

    Sku 95591/95592/95593 for technical questions, please call 1-800-444-3353 page 13 assembly diagram 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 31 power cord/plug not shown. N ote: some parts are listed and shown for illustration purposes only , and are not ava...

  • Page 14

    Sku 95591/95592/95593 for technical questions, please call 1-800-444-3353 page 14 limited 1 year / 90 day warranty harbor freight tools co. Makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that for a period of ninety da...