Users manual platform bike carrier ppr4b 4 bike carrier ppr3b 3 bike carrier ppr2b 2 bike carrier note: lights have now been upgraded to led.
4 bike carrier (ppr4b) used for illustration purposes page 2 supplied with 7 pin round plug and 7 pin flat plug adaptor if required..
Page 3 license plate can be fitted to light board.
Page 4 license plate can be fitted to light board.
Clean tow ball unlock key lock. Lift lever to open position. Fit to tow ball and lower lever to closed position. Check to make sure carrier is secure. Tow ball bracket can be adjusted for a more secure fit. For a looser fit on tow ball rotate cup in the indicated direction. For a tighter fit on tow ...
Page 6 frame tube diameter min ø 30mm max ø 50mm adjust wheel cradle by loosening fixing screw. Then tighten once in desired position. Tighten straps firmly. Loading procedure when loading bike carrier always start with the closest cradle to the vehicle. Fixing screw.
Page 7 1. Push bike towards vehicle 2. Press tilt lever. 3. Allow bikes to tilt back. Tilt lever how to tilt.
Www.Bikecorp.Com.Au p.O. Box 1620 clayton south, vic, 3169 safety carefully read all of these instructions and safety recommendations before assembling and using this bike carrier. Total combined bike and rack weight must not exceed total rated maximum of tow ball. Individual bike weight must not ex...
