Reach trail(offroad) owner manual reach trail(offroad) owner manual.
Reach trail(offroad) owner manual reach features • the riding geometry of full sized off-road bikes • the gear ratio of full sized off-road bikes – 18.75~111inch • effective front and rear suspension. • rigid small wheels for agile acceleration and fast stopping. • small front area for better aerody...
Reach trail(offroad) owner manual specification frame built of al7005 t6 aluminum, rigid front triangle and rear swing arm with rear shock front fork built of al7005 t6 aluminum, trailing link suspension seat post promax sp-228 31.6mm tires/tubes kenda 20”x1-3/8” (37-451) skin wall 85psi rims alex d...
Reach trail(offroad) owner manual assembly procedures step 1: unpack the box – (1) a 90% assembled reach, (2) stem, (3) stem raiser, (4) seat / seat post, (5) front wheel / qr, and (6) pedals. 4.
Reach trail(offroad) owner manual step 2: assemble the stem to the gooseneck, and insert the stem raiser into the head tube, adjust the handlebar height and alignment, close the qr lever on top of the stem. Note: do not raise the seat higher than the minimum insertion mark. 5.
Reach trail(offroad) owner manual step 3: assemble the saddle and seat post, insert the seat post into the seat tube, and close the seat clamp qr lever. 6 note: do not raise the seat post higher than the minimum insertion mark (the upper one)..
Reach trail(offroad) owner manual step 4: insert the front hub skewer into the front hub and screw into the nub. Insert the front hub into the front dropouts. Let the qr lever on the left side of you. Align the center of the wheel. Close the qr lever at proper tightness. Hook the brake cable. 7.
Reach trail(offroad) owner manual step 5: assemble the pedals into the cranks. 8 step 6: adjust the height and alignment of seat post and handlebar. Note: do not raise the seat and handlebar over the minimum insertion mark..
Reach trail(offroad) owner manual accessories: front and rear carriers, kickstand 9 note: do no put over 25kg of luggage on the carriers..
Reach trail(offroad) owner manual 10 how to fold level 1. Remove front wheel and seat. Open the qr and swing the rear swing arm to get the rear wheel into the front fork.* pull out the handlebar stem. Stand the bicycle on the rear carrier(optional) or put it into the car trunk. *note: shift to the c...
Reach trail(offroad) owner manual 11 how to fold level 2. Take off the rear wheel, pack the bike in a carrying bag for travel..
