Pacific SCE-4 Parts & Operating Manual

Manual is about: SELF CONTAINED EXTRACTOR

Summary of SCE-4

  • Page 1

    Please read this book this operator’s book has important information for the use and safe operation of this machine. Read this book carefully before using the machine. Keep this book and tell all operators to read the book. If you do not follow the instructions, you can cause an injury or damage equ...

  • Page 2

    Grounding instructions this machine must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This machine is equipped with a cord having an equipment-grounding conductor and grounding plug. The ...

  • Page 3

    Important safety instructions to ensure the safe operation of this machine, you must read and understand all warnings and instructions in this book. If you do not understand, ask your supervisor. Read all instructions before using this machine warning: to reduce the risk of fire, electric shock, or ...

  • Page 4: Operating Procedures

    4 operating procedures warning! For the safe operation of this machine follow the instructions given in this booklet and the training given by your supervisor. Failure to do so can result in personal injury and/or damage to machine and property! Do not operate machine in an explosive environment! Wa...

  • Page 5: Operating Procedures

    Operating procedures operation (continued) 10. As dirty solution is recovered, some foaming may be noted. Excessive foaming can be counteracted with liquid defoamer applied according to the chemical manufacturers directions. Do not allow foam to rise into or near the dome; this will harm the vacuum ...

  • Page 6: Servicing (Continued)

    6 servicing (continued) an authorized service center should perform the following procedures: the cogged belt drive system rarely requires tightening. If the belt becomes loose from wear, it is time to replace it. To do so: 1. Remove acorn nut and thru-bolt from brush chassis lift handle 2. Gently t...

  • Page 7

    Sce-4 self contained extractor 7.

  • Page 8

    Sce-4 self contained extractor - drawing 1 8.

  • Page 9

    9 item part no. Description qty. Item part no. Description qty. 1 204170 hose, vac head, 17" 1 32 w153d2 screw, 10-24 x 3/4 php ms 3 2 3698 cuff, 1.5" 3 33 w106d nut, 10-24 hex ss 6 3 204171 hose, vac short, 6" 1 34 w124d washer, lock #10 int. Tooth 7 4 245112 decal, warning add defoamer 1 35 962103...

  • Page 10

    Sce-4 self contained extractor - drawing 2 10 48.

  • Page 11

    11 item part no. Description qty. Item part no. Description qty. 1 204182 hose, reinforced, 12" 1 32 w353d screw, 1/4-20 x 5/8 fhpms ss 2 2 203359 fitting, 3/8 hose barb 3 33 980032 washer, 1/4 fh external tooth 2 3 203302 quick connect, 1/4 male 1 34 a13438 guard, belt 1 4 203308 quick connect, 1/4...

  • Page 12

    2259 s. Sheridan drive muskegon, michigan 49442-6252 800-968-1332 fax 800-863-9536 5/15 warranty policy extractor, self contained, sce-4 the pacific floorcare sce-4 self cotained extractors have been manufactured, tested and inspected in accordance with specific engineering requirements and are warr...