1. DL manuals
  2. Pacific
  3. Scrubber
  4. TE-12
  5. Parts & Operating Manual

Pacific TE-12 Parts & Operating Manual

Manual is about: TANK EXTRACTOR

Summary of TE-12

  • Page 1

    Please read this book this operator’s book has important information for the use and safe operation of this machine. Read this book carefully before starting the machine. Keep this book and tell all operators to read the book. If you do not follow the instructions, you can cause an injury or damage ...

  • Page 2

    Grounding instructions this machine must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This machine is equipped with a cord having an equipment-grounding conductor and grounding plug. The ...

  • Page 3

    Important safety instructions to ensure the safe operation of this machine, you must read and understand all warnings and instructions in this book. If you do not understand, ask your supervisor. Read all instructions before using this machine warning: to reduce the risk of fire, electric shock, or ...

  • Page 4: Operating Procedures

    4 operating procedures warning! For the safe operation of this machine follow the instructions given in this booklet and the training given by your supervisor. Failure to do so can result in personal injury and/or damage to machine and property! Do not operate machine in an explosive environment! Wa...

  • Page 5: Notes

    5 notes.

  • Page 6

    Te-12 tank extractor - final assembly 6 10 9 8 11 6 7.

  • Page 7

    7 item part no. Description qty. 1 920665 nut-hex 1/4 ss nyloc 1 2 254554 hinge 1 3 911552 cable-steel lanyard 1 4 962358 screw-1/4-20x1-1/2 hex ss 2 5 w104d washer-flat 4 6 252004 clamp-hose 5/8 plastic 1 7 251804 base-black 1 8 255121 lid assembly 1 9 258627 tank-recovery-black 1 10 258683 tank-so...

  • Page 8

    Te-12 tank extractor - recovery tank assembly 8.

  • Page 9

    9 item part no. Description qty. 1 920666 nut-hex 10-32 ss nyloc 4 2 s400p5 locknut 1-1/2 1 3 962453 screw 10-32x1 ss phillips 4 4 w104d washer-1/4 flat 4 5 s216p clamp-hose 1 6 253306 fitting-pipe 1-1/2 mpt 1 7 252807 elbow 1-1/2 fipt x 1-1/2 1 8 s400pb4 elbow-black 1 9 253343 fitting-pipe 1-1/2 1 ...

  • Page 10

    Te-12 tank extractor - solution tank assembly 10

  • Page 11

    11 item part no. Description qty. 1 920666 nut-hex 10-32 ss nyloc 2 2 962453 screw 10-32 x 1 ss phillips 2 3 w104d washer 1/4 flat sae ss 2 4 211310 body-90 jet w/lock nut 1 5 253302 filter screen 1 6 253901 handle-grab plastic 1 7 258683 tank-solution-blue 1.

  • Page 12

    Te-12 tank extractor - base assembly 12.

  • Page 13

    13 item part no. Description qty. 1 257405 rod-axle 1/2 x 19" 1 2 251804 base-black-12 gal 1 3 908059 cord asm 25' 16-3 sjt 1 4 920011 nut 1/4-20 elastic stop 16 5 920619 nut 1/2 pipe lock 1 6 920004 nut 1/4-20 hex 6 7 254137 hose-solution 3/8 x 48" 1 8 920666 nut-hex 10-32 ss nyloc 2 9 962339 screw...

  • Page 14

    Te-12 tank extractor - hose assembly 14.

  • Page 15

    15 item part no. Description qty. 1 252403 cuff-hose 1.5 x 1.5" 2 2 254105 hose-vacuum 1.5" (per foot, no cuffs) 15 ft 3 254113 hose-vacuum assm 15' w/cuffs 1 4 s250p hose-solution 3/8" (per foot) 15 ft 5 203359 fitting-hose barb 3/8" 2 6 202050 clamp-solution hose 2 7 203308 quick connect - 1/4" fe...

  • Page 16

    Te-12 tank extractor - wand assembly 17 1 2 3 4 5 6 5 7 8 9 10

  • Page 17

    18 item part no. Description qty. 1 203302 quick connect 1/4" male 1 2 s906a nipple-brass 1 3 t4055 elbow-45 degree brass 1 4 239401 valve w/trigger 1 5 215007 kit-valve repair (o-ring/spring/disk) s223p barb-1/4 to 1/4" brass 2 6 214116 hose assembly (valve to jets) 1 7 s980p body-spray jet 2 8 s28...

  • Page 18

    Te-12 tank extractor - wiring diagram 18.

  • Page 19

    Warranty policy extractor, tank, te-12 the pacific floorcare te-12 tank extractors have been manufactured, tested and inspected in accordance with specific engi- neering requirements and are warranted to be free from defects in workmanship and materials as follows: five (5) years parts, one (1) year...