Pacific TRIUMPH 1190 Parts Manual,operating & Maintenance Instructions

Summary of TRIUMPH 1190

  • Page 1

    Read this book this operator’s book has important information for the use and safe operation of this machine. Read this book carefully before starting the machine. Keep this book and tell all operators to read the book. If you do not follow the instructions, you can cause an injury or dam- age equip...

  • Page 2: Introduction

    Introduction the self contained extractor is a fully self-contained, portable carpet extractor system and is intended for commercial use. A wand with external vacuum and solution hoses are not necessary with your machine, but available. The self contained extractor has a 100 psi solution pump and a ...

  • Page 3

    Important safety instructions when using an electrical appliance, basic precautions should always be followed, including the following: read all instructions before using this machine warning : to reduce the risk of fire, electric shock, or injury: 1. You must have training in the operation of this ...

  • Page 4

    4 preparation and transportation prestart-up checks the self contained extractor is very simple and easy to operate. Very little maintenance and service are required to keep your machine in top operating condition. The following procedures are recommended to maintain the high level of performance ex...

  • Page 5: Operating Procedures

    Operating procedures 5 the self contained extractor is the most “user friendly” self-contained extractors available. The following procedures are intended to describe and detail proper operation of your machine. Failure to follow these recom- mended procedures can reduce the machine’s performance an...

  • Page 6: Servicing

    6 servicing the self contained extractor is designed and manufactured to provide years of trouble free service with a minimum of maintenance and service. The following recommendations are intended to assist the operator and service technician in performing routine maintenance. Failure to follow thes...

  • Page 7

    7 3. Vacuum blower replacement: a) remove the dome top and carefully turn the machine upside down. B) remove the two hex bolts at the base of the black panel on the back of machine. C) remove the wheels in order to get at the hex bolts in step (d). Shoulder bolts hold the wheels on. D) then remove t...

  • Page 8: Tank & Blower Assembly

    Tank & blower assembly 8.

  • Page 9

    5 tank & blower assembly parts list 9 item part no. Description qty. Item part no. Description qty. 1 208662 recovery tank 1 39 980026 washer #8 int. Tooth 5 2 w191d1 screw #10-24 x 3/4 rhp ss 2 40 w143d nut: hex #8-32 ss 4 3 217201 dome clasp 1 41 w317d screw #4-40 x 1-1/4" php ms ss 2 4 w106d nut ...

  • Page 10: Pump & Chassis

    10 pump & chassis.

  • Page 11: Pump & Chassis Parts List

    11 pump & chassis parts list item part no. Description qty. Item part no. Description qty. 1 s626p strainer 1 27 211501 jet cap 4 2 w166d brass: jam nut 5 28 w205d screw #8-32 x 1" nylon m/s 1 3 s372p washer: nylon 1 29 a13445 rectifier 1 4 211310 90° jet body 3/8 2 30 920617 nut #8-32 hex nylon 2 5...

  • Page 12

    Warranty policy self-contained extractor the pacific self-contained extractor has been manufactured, tested and inspected in accordance with specific engineering requirements and is warranted to be free from defects in workmanship and materials as follows: five (5) years parts, one (1) year labor – ...