Summary of EasyNote B3
Page 1
Packard bell easynote b3 disassembly manual.
Page 2: Table of Contents
1 packard bell easynote b3 disassembly manual table of contents overview....................................................................................................................................................... 2 technician notes.............................................................
Page 3: Overview
2 packard bell easynote b3 disassembly manual overview this document contains step-by-step disassembly instructions for the easynote b3 chassis. The instructions are illustrated where necessary with images of the part that is being removed or disassembled. Furthermore, the screws that are removed ar...
Page 4: Hazardous Voltage
3 packard bell easynote b3 disassembly manual hazardous voltage there is hazardous voltage present inside the computer when it is connected to an ac supply, even when the computer’ s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, contact an a...
Page 5: System Disassembly
4 packard bell easynote b3 disassembly manual system disassembly hdd to remove the hdd, perform the following steps: 1. Remove the hdd cover (2 screws marked a on picture 1 ). 2. Remove the 2 screws holding the hdd bracket. 3. Pull back the hdd bracket and gently lift out the hdd. 4. Remove the brac...
Page 6
5 picture 2. Power cable of heat sink assembly picture 3. Heat sink assembly screws wifi lan adapter (mini pci) to remove the wireless lan adapter (mini pci), perform the following steps: 1. Remove the bottom cover (5 screws marked b on picture 1 ). 2. Push the clips securing the card sideways; the ...
Page 7
6 picture 4. Wlan mini pci adapter and antenna note: the wlan card has 2 connectors: main and aux. Please be sure to connect the antenna to the main connector when re-assembling the wlan card! Keyboard to remove the keyboard, perform the following steps: 1. Remove the 3 screws located in the battery...
Page 8
7 picture 7. Keyboard flat cable speakers to remove the speakers, perform the following steps: 1. Remove the keyboard cover as described in the chapter keyboard . 2. Disconnect the speaker cables as shown in picture 8 , picture 9 , and picture 10 . 3. Remove the screws securing the speaker (2 screws...
Page 9
8 picture 10. Right speaker connector lcd screen assembly to remove the lcd screen assembly, perform the following steps: 1. Remove the keyboard top cover as described in the chapter keyboard . 2. Remove the lcd hinge covers; these are ‘ clicked’ in place on the backside of the notebook. The best wa...
Page 10
9 picture 11. Bottom base screws picture 12. Glide pad flat cable picture 13. Main board screws under keyboard cover.
Page 11
10 picture 14. Main board screws translation board the translation board is a small pcb with a usb, vga-out and ac adapter connector. To remove it, perform the following steps: 1. Perform all steps to remove the main board (see chapter main board ). 2. Remove the screw holding the translation board....
Page 12: Lcd Screen Disassembly
11 picture 15. Lcd switch lcd screen disassembly lcd lid assembly to remove the lcd lid assembly, perform the following steps: 1. Remove the keyboard top cover as described above. 2. Remove the lcd hinge covers; these are ‘ clicked’ in place on the backside of the notebook. The easiest way is to lev...
Page 13
12 picture 16. Lcd bezel inverter board to remove the inverter board, perform the following steps: 1. Unplug the cable on the inverter board. 2. Remove the screw (screw a in picture 17 ). 3. Take away the inverter board. Picture 17. Lcd assembly without bezel lcd panel to remove the lcd panel, perfo...
Page 14
13 3. Gently lift out the lcd panel. 4. Remove the remaining 2 screws on each side of the lcd panel to remove the brackets. Wireless antenna to remove the wireless antenna, perform the following steps: 1. After removing the lcd panel, remove the tape holding the antenna. 2. Remove the screw (see pic...
Page 15: Notice
14 packard bell easynote b3 disassembly manual notice the information in this guide is subject to change without notice. This guide contains information protected by copyright. No part of this guide may be photocopied or reproduced in any form or by any means without prior written consent from nec c...