Packard Bell EasyNote BG46 Disassembly Manual

Manual is about: EasyNote BG Series

Summary of EasyNote BG46

  • Page 1

    Packard bell easynote bg series disassembly guide downloaded from lpmanual.Com manuals.

  • Page 2: Table of Contents

    Easynote bg disassembly manual 2 table of contents overview ..................................................................................................................3 technician notes......................................................................................................3 disa...

  • Page 3: Overview

    Easynote bg disassembly manual 3 overview this document contains step-by-step disassembly instructions for the easynote bg series. The instructions are illustrated where necessary with images of the part of the device that is being removed or disassembled. Packard bell reserves the right to make cha...

  • Page 4: Battery

    Easynote bg disassembly manual 4 battery 1. Push aside the 2 latches securing the battery. Fig. 1 removing the battery . 2. Pull out the battery. Hard disk 1. Remove the battery as described above. 2. Remove the 3 screws securing the hard disk cover. Fig. 2 the hdd cover. Downloaded from lpmanual.Co...

  • Page 5

    Easynote bg disassembly manual 5 3. Remove the hdd cover. 4. Pull the plastic tab on the drive to disconnect it. Fig. 3 the hdd cover. 5. Take the drive out if its compartment. 6. Remove the 4 screws of the hdd bracket. Fig. 4 the hdd flat cable. 7. Take away the bracket from the hard drive. Downloa...

  • Page 6: Wireless Lan

    Easynote bg disassembly manual 6 wireless lan 1. Remove the battery as described above. 2. Remove the 3 screws securing the hard disk cover. Fig. 5 the hdd cover. 3. Remove the hdd cover. 4. Disconnect the 2 antenna cables from the wireless lan card. 5. Remove the 2 screws holding the card. Download...

  • Page 7

    Easynote bg disassembly manual 7 fig. 6 the wireless lan screws and cables. 6. The left end of the card will now jump up. Fig. 7 the wireless lan card. 7. Carefully take out the wireless lan card. Downloaded from lpmanual.Com manuals.

  • Page 8: Memory

    Easynote bg disassembly manual 8 memory 1. Remove the battery as described above. 2. Remove the 5 screw securing the cpu cover. Fig. 8 the cpu cover. 3. Remove the cpu cover. 4. Release the metal clips that secure the memory modules and take out the module(s). Fig. 9 the bottom of the notebook. Down...

  • Page 9: Keyboard

    Easynote bg disassembly manual 9 keyboard 1. Remove the battery as described above. 2. There are 5 small slots; insert a small flat-blade screwdriver in each slot to unlatch the keyboard. Fig. 10 the keyboard clips. 3. Carefully unlock the white clamp. 4. Slide the keyboard cable out of the connecto...

  • Page 10: Cpu Fan

    Easynote bg disassembly manual 10 cpu fan 1. Remove the battery and cpu cover as described above. Fig. 12 the cpu fan. 2. Remove the single screw holding the cpu fan. 3. Disconnect the fan’ s power cable. 4. Take the fan out of the notebook. Heatsink 1. Remove the battery and cpu fan as described ab...

  • Page 11: Cpu

    Easynote bg disassembly manual 11 fig. 13 the heatsink. Cpu 1. Remove the battery, fan and heatsink as described above. 2. Use a small flatbed screwdriver to unlock the cpu. Fig. 14 the cpu. Top cover and touchpad 1. Remove the battery and keyboard as described above. 2. Remove the single screw of t...

  • Page 12: Lcd Assembly

    Easynote bg disassembly manual 12 fig. 15 the top cover screws. 4. Turn over the unit and remove the 3 screws securing the top cover. 5. Disconnect the 2 cables. 6. Unclip the latches around the edge of the top cover. Fig. 16 the top cover screws. Lcd assembly 1. Remove the battery, hard disk, keybo...

  • Page 13

    Easynote bg disassembly manual 13 2. Disconnect the 6 cables connecting the lcd panel to the mainboard. 3. Disconnect the cables from the wlan card. Make sure the tape securing them is removed everywhere. 4. Remove the 6 hinge screws. Fig. 17 the hinge screws and lcd cable. 5. Remove the 5 rubber pl...

  • Page 14

    Easynote bg disassembly manual 14 fig. 18 the lcd cover screws. 6. Lift of the bezel. The lcd panel and webcam will be revealed. 7. Remove the 4 screws. Fig. 19 the lcd panel screws. 8. Take out the lcd panel. Downloaded from lpmanual.Com manuals.

  • Page 15: Vga Board

    Easynote bg disassembly manual 15 vga board 1. Remove the battery, keyboard, cpu fan and top cover as described above. 2. Disconnect the vga board connector cable from the mainboard. 3. Remove the 2 screws. Fig. 20 the connectors and screw for vga board. 4. Remove the vga board. Fig. 21 the vga boar...

  • Page 16: Power/ethernet Board

    Easynote bg disassembly manual 16 power/ethernet board 1. Remove the battery, keyboard, cpu fan and top cover as described above. 2. Disconnect the cable connector. 3. Remove the 2 screws holding the board. Fig. 22 the power/ethernet board. 4. Remove the board. Mainboard 5. Remove the battery, keybo...

  • Page 17

    Easynote bg disassembly manual 17 fig. 23 the mainboard screws and connectors. 8. Remove the mainboard. Downloaded from lpmanual.Com manuals.

  • Page 18: Reassembly Notes

    Easynote bg disassembly manual 18 reassembly notes when reassembling the device, please take notice of the order in which the parts can be put back and reattached. Notice the information in this guide is subject to change without notice. This guide contains information protected by copyright. No par...