Summary of EasyNote E Series
Page 1
Easynote e series disassembly manual.
Page 2
Easynote e series disassembly manual page 2 table of contents overview.................................................................................................................................................................3 technician notes......................................................
Page 3
Easynote e series disassembly manual page 3 overview this document contains step-by-steps disassembly instructions for the easynote e series chassis. The instructions are illustrated where necessary with images of the part that is being removed or disassembled. Furthermore, the screws that are remov...
Page 4
Easynote e series disassembly manual page 4 hazardous voltage there is hazardous voltage present inside the computer when it is connect to an ac supply, even when the computer’ s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, contact an autho...
Page 5
Easynote e series disassembly manual page 5 removing the battery perform the following steps to remove the battery: 1. Make sure to power off the easynote e series. 2. Turn the unit upside down. 3. Unlock the battery and slide it out of its place as the arrow shows in fig. 1 fig. 1 removing the batt...
Page 6
Easynote e series disassembly manual page 6 removing the hard disk drive to remove the hard disk drive, first remove the battery (see removing the battery ), then perform the following steps: 1. Remove the screws as shown in fig. 2 fig. 2 removing the hard disk drive cover 2. Release screw that secu...
Page 7
Easynote e series disassembly manual page 7 3. Disconnect and lift up the hard disk module as shown in fig. 4 fig. 4 disconnecting the hard disk drive 4. Unscrew the four screws on both sides of the hard disk drive as shown in fig. 5 fig. 5 unscrewing the hard disk drive bracket screws m4x3 silver.
Page 8
Easynote e series disassembly manual page 8 removing the memory module to remove the memory module, first remove the battery (see removing the battery ), then perform the following steps: 1. Release the one screw retaining the memory module cover. Fig. 6 removing the screw retaining the memory modul...
Page 9
Easynote e series disassembly manual page 9 removing the wireless lan to remove the wireless module, first remove the battery (see removing the battery ), then perform the following steps: 1. Remove the screw retaining the mini pci slot cover as shown in fig. 8 fig. 8 removing the screws screw retai...
Page 10
Easynote e series disassembly manual page 10 removing the cpu to remove the cpu, first remove the battery (see removing the battery ), then perform the following steps: 3. Remove the screw retaining the cpu cover as shown in fig. 10 fig. 10 removing the screws retaining cpu cover 4. Remove heat sink...
Page 11
Easynote e series disassembly manual page 11 5. Unlock cpu from cpu socket and lift up the cpu carefully. Fig. 12 unlock cpu for easynote e2,e4 and e5. Fig. 13 unlock cpu for easynote e6..
Page 12
Easynote e series disassembly manual page 12 fig. 14 unlock cpu for easynote e1 and e3..
Page 13
Easynote e series disassembly manual page 13 removing the optical disk drive to remove the odd, first remove the battery (see removing the battery ), then perform the following steps: 1. Remove the screws retaining the optical drive as shown in fig. 15 fig. 15 releasing the optical drive 2. Carefull...
Page 14
Easynote e series disassembly manual page 14 removing the keyboard to remove the keyboard, first remove the battery (see removing the battery ), then perform the following steps: 1. Push the keyboard cover from battery compartment as shown in fig. 16 fig. 16 releasing the keyboard cover 2. Lift up t...
Page 15
Easynote e series disassembly manual page 15 3. Lift up the keyboard and disconnect it from the system as shown in fig. 18 fig. 18 disconnect keyboard flat cable removing the main board to remove the main board , first remove the battery (see removing the battery ), remove keyboard (see removing key...
Page 16
Easynote e series disassembly manual page 16 2. Disconnect all cable connection located near to left speaker as shown in fig. 20 fig. 20 lcd cable and left speaker connection 3. Disconnect touch pad connection as shown in fig. 21 fig. 21 touch pad connection.
Page 17
Easynote e series disassembly manual page 17 4. Flip over unit and release all screws as shown in fig. 22 fig. 22 removing the top cover screws 5. Carefully lift up, release the top cover, and put it aside. 6. Unscrew screws on mdc modem module and disconnect it before lift up mdc modem. Fig. 23 rem...
Page 18
Easynote e series disassembly manual page 18 7. Unscrew screws all screws shown in fig. 24 and disconnect right speaker connection on main board. Fig. 24 screws on main board 8. Lift up main board as shown in fig. 25 fig. 25 lifting up main board a = m5x2.5 sliver b = m6x2 black c = m2.5x10 silver.
Page 19
Easynote e series disassembly manual page 19 note 1: when lifting up main board bewares the coil, attach on the wireless antenna. Note 2: make sure wireless antenna are properly place in correct location when assemble..
Page 20
Easynote e series disassembly manual page 20 removing the lcd module to remove lcd module first remove main board (see removing main board ), then perform the following steps: 1. Release screws show in fig. 26 fig. 26 removing screws retaining lcd module 2. Carefully lift up the lcd module. M6x2.5 b...
Page 21
Easynote e series disassembly manual page 21 removing the lcd panel to remove the lcd panel, first remove the lcd module (see removing the lcd module ), then perform the following steps: 1. Use pin to remove rubber cover on the lcd module as shown in fig. 27 fig. 27 removing the rubber covers & scre...
Page 22
Easynote e series disassembly manual page 22 3. Unscrew all screws circled in fig. 29 and disconnect lcd back light cable from inverter board before lift up lcd penal. Fig. 29 removing the lcd panel screws 4. Remove the screws at both sides of the lcd panel in order to release the lcd hinges as show...
Page 23
Easynote e series disassembly manual page 23 5. Remove the screws at both sides of the wireless antenna as shown in fig. 31 , release the wires from the adhesive tapes and put the wireless antenna aside. Fig. 31 removing wireless antenna 6. Remove the screws on lcd module holder at both sides of the...
Page 24
Easynote e series disassembly manual page 24 removing the touch pad to remove the touch pad, first remove the top cover (see removing the top cover ), then perform the following steps: 1. Unscrew the screws on the top cover as shown in fig. 34 fig. 34 top cover 2. Carefully separate touch pad module...
Page 25
Easynote e series disassembly manual page 25 removing the speaker assembly to remove the speaker assembly, first open up the keyboard cover (see removing keyboard ), remove bottom cover (see removing main board ) the perform the following steps: 1. Remove the screws holding speaker assembly as shown...
Page 26
Easynote e series disassembly manual page 26 screws m3.5x2 black m6x2.5 black m4x3 silver m10.5x2 sliver m4.5x3.5 black m3x2 sliver m5x2.5 sliver m6x2 black m2.5x10 silver m4.5x2.5 sliver m3.5x2.5 sliver m4.5x2 black m3.5x2 sliver.
Page 27
Easynote e series disassembly manual page 27 notice the information in this guide is subject to change without notice. This guide contains information protected by copyright. No part of this guide may be photocopied or reproduced in any form or by any means without prior written consent from nec com...