Summary of EasyNote GN45
Page 1
Packard bell easynote gn45 disassembly manual.
Page 2: Table of Contents
11111 packard bell easynote gn45 disassembly manual 1 table of contents overview ................................................................................................................................................ 2 technician notes ..........................................................
Page 3: Overview
Packard bell easynote gn45 disassembly manual 2 overview this document contains step-by-step disassembly instructions for the packard bell easynote gn45. The instructions are illustrated where necessary with images of the part that is being removed or disassembled. Packard bell reserves the right to...
Page 4: Hazardous Voltage
Packard bell easynote gn45 disassembly manual 3 hazardous voltage there is hazardous voltage present inside the notebook when it is connected to an ac supply, even when the notebook’s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, contact an ...
Page 5: Battery
44444 packard bell easynote gn45 disassembly manual 4 battery perform the following steps to remove the battery: 1. Make sure the power is off. 2. Turn the unit upside down. 3. Unlock the left battery lock. 4. Push battery lock on right outward to the release the battery. 5. Slide the battery out of...
Page 6: Optical Disk Drive
55555 packard bell easynote gn45 disassembly manual 5 2. Pull out the hard disk drive using the plastic tab. Fig. 3 removing the hard disk drive. 3. Remove the two screws on both sides of the hard disk drive shield. Fig. 4 unscrewing the hard disk drive shield screws. Optical disk drive to remove th...
Page 7: Memory Module
66666 packard bell easynote gn45 disassembly manual 6 2. Remove the optical disk drive from the drive bay. Fig. 6 removing the optical drive. Memory module to remove the memory module, first remove the battery (see battery ) and then perform the following steps: 1. Release the screws retaining the m...
Page 8: Wlan Card
77777 packard bell easynote gn45 disassembly manual 7 fig. 8 removing the memory module. Wlan card to remove the wlan card, first remove the battery (see battery ) and then perform the following steps: 1. Release the screws retaining the memory module slot cover (see step 1 in memory module ). 2. Di...
Page 9: Keyboard
88888 packard bell easynote gn45 disassembly manual 8 keyboard to remove the keyboard, first remove the battery (see battery ) and then perform the following steps: 1. Remove the indicated screws on the back of the notebook. Fig. 10 left keyboard back screw. Fig. 11 right keyboard back screw. 2. Use...
Page 10: Top Cover
99999 packard bell easynote gn45 disassembly manual 9 fig. 13 releasing the keyboard. 4. Before removing the keyboard, disconnect the keyboard flat cable. Fig. 14 disconnecting the flat cable. Top cover to remove the top cover, first remove the battery (see battery ), remove the hard disk drive (see...
Page 11: Lcd Module
1010101010 packard bell easynote gn45 disassembly manual 10 fig. 15 removing the bottom cover screws. 2. Remove the four screws securing the top cover to the motherboard. Fig. 16 releasing the top cover. 3. Separate the top cover from the casing. Lcd module to remove the lcd module, remove the keybo...
Page 12: Lcd Panel
1111111111 packard bell easynote gn45 disassembly manual 11 fig. 17 removing the lcd module. Lcd panel to remove the lcd panel, remove the keyboard cover (see keyboard ) and then perform the following steps: 1. Remove the screw securing the lcd cover next to the hinge on each side. Fig. 18 removing ...
Page 13: Main Board
1212121212 packard bell easynote gn45 disassembly manual 12 3. Disconnect the vga cable. Fig. 20 disconnecting the vga cable. Main board to remove the main board, first remove the top cover (see top cover ) and then perform the following steps: 1. Remove the four screws securing the main board. Fig....
Page 14: Express Card Reader
1313131313 packard bell easynote gn45 disassembly manual 13 fig. 22 removing the heat sink. 2. Remove the cpu. Fig. 23 removing the cpu. Express card reader to remove the express card reader, remove the top cover (see top cover ) and then do the following: 1. Remove the two screws securing the expre...
Page 15: Touchpad
1414141414 packard bell easynote gn45 disassembly manual 14 touchpad to remove the touchpad, first remove the top cover (see top cover ) and then perform the following steps: 1. Remove the four screws securing the touchpad to the top cover. Fig. 25 removing the touchpad. Speaker assembly to remove t...
Page 16
1515151515 packard bell easynote gn45 disassembly manual 15 fig. 27 removing the power button/ wifi / eco card..
Page 17: Notice
1616161616 packard bell easynote gn45 disassembly manual 16 notice the information in this guide is subject to change without notice. This guide contains information protected by copyright. No part of this guide may be photocopied or reproduced in any form or by any means without prior written conse...