Summary of EasyNote MH Series
Page 1
Packard bell easynote mh series disassembly guide.
Page 2: Table of Contents
Easynote mh disassembly manual 2 table of contents overview ..................................................................................................................3 technician notes......................................................................................................3 disa...
Page 3: Overview
Easynote mh disassembly manual 3 overview this document contains step-by-step disassembly instructions for the easynote mh series. The instructions are illustrated where necessary with images of the part of the device that is being removed or disassembled. Packard bell b.V. Reserves the right to mak...
Page 4: Battery
Easynote mh disassembly manual 4 battery 1. Push aside the 2 latches securing the battery. Fig. 1 removing the battery. 2. Pull out the battery optical drive 1. Remove the battery and keyboard as described above. 2. Remove the 2 screws. Fig. 2 the optical drive cover. 3. Pull the drive out..
Page 5: Memory Modules
Easynote mh disassembly manual 5 4. Remove the screws of the 2 drive brackets (one on the rear, one on the side). Fig. 3 the optical drive bracket. 5. Remove the brackets from the optical drive. 6. Open the drive tray and unlock the 2 latches of the drive bezel. Fig. 4 the optical drive bezel. 6. Ta...
Page 6
Easynote mh disassembly manual 6 fig. 5 the memory modules cover. 3. Push the clips aside to unlock the memory module. 4. Remove the memory cover. The screw stays attached to the cover. Fig. 6 the memory modules 5. Remove the memory module. Always remove the top one first..
Page 7: Keyboard
Easynote mh disassembly manual 7 keyboard 1. Remove the battery as described above. 2. Push back the 4 clips that secure the keyboard with a flathead screwdriver. Fig. 7 the keyboard clips. 3. Lift up the keyboard. 4. Disconnect the flatcable by carefully lifting the black clamp. Fig. 8 the keyboard...
Page 8: Bottom Cover
Easynote mh disassembly manual 8 bottom cover 1. Remove the battery, optical drive and keyboard as described above. 2. Disconnect the power cable from the mainboard. Fig. 9 the mainboard power cable. 3. Remove the 2 screws on the rear side of the notebook. Fig. 10 the rear screws of the bottom cover...
Page 9: Hard Disk
Easynote mh disassembly manual 9 fig. 11 the bottom of the notebook. 5. Take away the bottom cover. Hard disk 1. Remove the bottom cover as described above. 2. Pull the hard disk to the left. Fig. 12 the hdd. 3. Remove the 2 screws from the hard drive bracket..
Page 10: Wireless Lan
Easynote mh disassembly manual 10 fig. 13 the hdd bracket. Wireless lan 1. Remove the bottom cover as described above. 2. Disconnect the wireless lan antenna. 3. Remove the screw securing the wireless adapter. 4. Take away the wireless lan adapter. Fig. 14 the wlan card..
Page 11: Cpu Fan
Easynote mh disassembly manual 11 cpu fan 1. Remove the bottom cover as described above. 2. Disconnect the wireless lan antenna as described above. Free the antenna from its clamps. 3. Disconnect the power cable of the cpu fan. 4. Remove the 2 screws of the cpu fan. Fig. 15 the cpu fan. 5. Remove th...
Page 12: Cpu
Easynote mh disassembly manual 12 fig. 16 the cpu cooler. 3. Take away the heatsink. Cpu 1. Remove the cpu heatsink as described above. 2. Turn the screw of the cpu socket 180 degrees. 3. Take the cpu out of its socket. Fig. 17 the cpu cooler..
Page 13: Rtc Battery
Easynote mh disassembly manual 13 note: the easynote mh35 has a socket p. This looks a lot like the older sockets for intel mobile cpus, however, it is not pin-compatible. Rtc battery 1. Remove the bottom cover as described above. 2. Disconnect the rtc battery from the mainboard. Fig. 18 the rtc bat...
Page 14
Easynote mh disassembly manual 14 3. Disconnect the standby switch. Fig. 20 the standby switch. 4. Disconnect the touchpad flatcable, by gently lifting the black clip. Fig. 21 the touchpad flatcable. 5. Disconnect the lcd cable and the lcd grounding cable. The lcd grounding cable is the one held by ...
Page 15
Easynote mh disassembly manual 15 fig. 22 the lcd cable and grounding cable. 6. Remove the 2 hex bolts adjacent to the vga connector. 7. Remove the 2 screws from the mainboard..
Page 16: Speakers
Easynote mh disassembly manual 16 fig. 23 the mainboard assembly. Modem and rj-11 port (optional) 1. The modem is part of the mainboard and cannot be exchanged separately. 2. To exchange the cable and rj-11 port, remove the mainboard as described above. You can leave the cpu (and its fan and cooler)...
Page 17: Touchpad
Easynote mh disassembly manual 17 2. Remove the screws securing the speakers. 3. Release the cable from its clamps. Fig. 25 the speaker cables. Note: the speakers share one cable. They cannot be exchanged separately. Touchpad 1. The touchpad is part of the top cover and does not require further disa...
Page 18
Easynote mh disassembly manual 18 2. Disconnect the lcd cable and the lcd grounding cable. The lcd grounding cable is the one held by the screw. Fig. 27 the lcd cable and grounding cable. 3. Disconnect the wireless lan antenna from the card..
Page 19: Lcd Panel
Easynote mh disassembly manual 19 fig. 28 the wireless lan module. 4. Take away the screen from the top cover. Lcd panel 1. Remove the lcd assembly as described above. 2. Remove the 6 rubber stoppers from the lcd bezel. Fig. 29 the lcd panel..
Page 20
Easynote mh disassembly manual 20 3. Remove the 6 screws that were hidden by the rubber stoppers. 4. Remove the lcd bezel. It is clicked in its place. 5. Disconnect the cable from the web cam. Fig. 30 the web cam cable. 6. Disconnect the inverterboard cables. Fig. 31 the inverter board cables. 7. Ta...
Page 21
Easynote mh disassembly manual 21 fig. 32 the lcd hinge screws. 9. Disconnect the lcd cable. Peel away the tape and pull the cable from the connector. Fig. 33 the lcd cable..
Page 22: Webcam
Easynote mh disassembly manual 22 webcam 1. Follow the instructions on removing the lcd panel up to and including step 5. 2. Remove the 2 screws. Fig. 34 webcam. 3. Remove the webcam. Inverter board 1. Follow the instructions on removing the lcd panel up to and including step 6, skipping step 5 (the...
Page 23
Easynote mh disassembly manual 23 fig. 36 the wireless antenna..
Page 24: Reassembly Notes
Easynote mh disassembly manual 24 reassembly notes when reassembling the device, please take notice of the order in which the parts can be put back and reattached. Notice the information in this guide is subject to change without notice. This guide contains information protected by copyright. No par...