Summary of EasyNote ML
Page 1
Packard bell easynote ml disassembly manual.
Page 2: Table of Contents
11111 packard bell easynote ml disassembly manual 1 table of contents about this guide........................................................................................................................... 2 for more information ......................................................................
Page 3: About This Guide
Packard bell easynote ml disassembly manual 2 about this guide this guide contains systematic disassembly instructions for the packard bell easynote ml. The instructions are illustrated where necessary with images of the part that is being disassembled. Packard bell b.V. Reserves the right to make c...
Page 4: Hazardous Voltage
Packard bell easynote ml disassembly manual 3 hazardous voltage there is hazardous voltage present inside the notebook when it is connected to an ac supply, even when the notebook’ s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, contact an a...
Page 5: Battery
44444 packard bell easynote ml disassembly manual 4 battery perform the following steps to remove the battery: 1. Make sure the power is off. 2. Turn the notebook upside down. Note: use an anti-static mat or something soft like a piece of cloth underneath the notebook to prevent damage to the exteri...
Page 6: Hard Disk Drives
55555 packard bell easynote ml disassembly manual 5 2. Use the emergency eject hole to open the optical disk drive. 3. Pull the tray and take out the optical disk drive from the drive. Fig. 3 the tray of the optical drive. Note: the tray bezel is a delicate part, use care when handling it. Hard disk...
Page 7: Memory
66666 packard bell easynote ml disassembly manual 6 5. Take the drives out of the compartment. 6. Remove the two screws on the metal brackets to separate them from the hard disks drives. Note: the drive bays in the compartment are not labelled, so you cannot see which hard disk drive the bios consid...
Page 8: Wireless Lan Adapter
77777 packard bell easynote ml disassembly manual 7 4. Carefully remove the memory module from the socket. Note: in case two memory modules have been installed, you have to remove the top module first before you can remove the one underneath. Wireless lan adapter to remove the wireless lan adapter, ...
Page 9: Top Cover
88888 packard bell easynote ml disassembly manual 8 fig. 9 removing keyboard. 3. Tilt the keyboard gently forward and let it rest upside down on the touchpad. 4. Carefully release the black clip securing the flat cable. 5. Disconnect the cable from the main board. Fig. 10 releasing keyboard flat cab...
Page 10
99999 packard bell easynote ml disassembly manual 9 fig. 11 location of the touchpad connector. 2. Carefully unlock the keyboard cable connector. 3. Pull the cable out of the connector. Fig. 12 location of the bottom base screws. 4. Turn the notebook over so the top is facing down and remove the 22 ...
Page 11: Lcd Panel
1010101010 packard bell easynote ml disassembly manual 10 fig. 13 location of the top cover screws. 5. Turn the notebook over so the top is facing up. 6. Tilt the screen all the way to allow space for the hinge covers to come loose. 7. Carefully take away the top cover from the base. Lcd panel to re...
Page 12: Main Board
1111111111 packard bell easynote ml disassembly manual 11 fig. 15 lcd hinge screws, lcd cable and grounding cable screw. Main board to remove the main board, perform all of the above disassembly steps, then perform the following steps: 1. Disconnect the five cables from the main board. Fig. 16 locat...
Page 13: Video Board
1212121212 packard bell easynote ml disassembly manual 12 fig. 17 location of the main board screws. Video board to remove the video board, first remove the battery (see main board on page 11), then perform the following steps: 1. Flip over the main board so you can see the back, which contains the ...
Page 14: Heat Sink
1313131313 packard bell easynote ml disassembly manual 13 heat sink to remove the optional intel turbo memory module (mini pci express), first remove the video board (see above), and then perform the following steps: 1. Disconnect the cpu fan cable. 2. Remove the four screws securing the heat sink. ...
Page 15: Lcd Assembly
1414141414 packard bell easynote ml disassembly manual 14 lcd assembly to disassemble the lcd panel, first remove it (see lcd panel on page 10) and then perform the following steps: 1. Remove the six rubber stoppers and then remove the screws. Fig. 21 the rubber stoppers and screws. 2. Remove the fr...
Page 16: Webcam
1515151515 packard bell easynote ml disassembly manual 15 webcam to remove the webcam, first remove the top cover of the lcd panel (see above) and then perform the following steps: 1. Remove both screws and lift out the webcam. Fig. 23 the webcam screws..
Page 17: Notice
1616161616 packard bell easynote ml disassembly manual 16 notice the information in this guide is subject to change without notice. This guide contains information protected by copyright. No part of this guide may be photocopied or reproduced in any form or by any means without prior written consent...