Packard bell grafite & carbon disassembly manual.
11111 packard bell grafite & carbon disassembly manual 1 table of contents about this guide.................................................................................................................2 for more information.............................................................................
Packard bell grafite & carbon disassembly manual 2 about this guide this guide contains systematic disassembly instructions for the packard bell grafite & carbon. The instructions are illustrated where necessary with images of the part that is being disassembled. Packard bell b.V. Reserves the right...
33333 packard bell grafite & carbon disassembly manual 3 front cover perform the following steps to remove the front cover: 1. Make sure the power is off. 2. Turn the device upside down. Note: use an anti-static mat or something soft like a piece of cloth underneath the device to prevent damage to t...
44444 packard bell grafite & carbon disassembly manual 4 2. Slide the top cover to the front of the device and remove the cover. Fig. 2 removing the top cover. Hard disk drive to remove the hard disk drive, first remove the front cover (see front cover on page 3), remove the top cover (see top cover...
55555 packard bell grafite & carbon disassembly manual 5 2. Slide the hard disk drive towards the front to disconnect it from the i/o board. Fig. 4 removing the hard disk drive. 3. Lift the hard disk drive out of the device (see fig. 4 ). I/o board to remove the i/o board, first remove the front cov...
66666 packard bell grafite & carbon disassembly manual 6 notice the information in this guide is subject to change without notice. This guide contains information protected by copyright. No part of this guide may be photocopied or reproduced in any form or by any means without prior written consent ...
