Packard Bell iDesign Series Disassembly Manual - page 11
of
13
Fig. 20: Removing the system fan
3. Unhook the system fan from the metal hooks on top of the
chassis and take it out of the system.
Fig. 21: Metal hooks on the chassis
Removing the Motherboard with Pentium 4
If the CPU installed is a Pentium 4, please perform these
additional steps before finally taking out the motherboard (see
section Removing the Motherboard):
1. Disconnect the power cable to the CPU cooler.
2. Remove the CPU cooler by unlocking the four latches.
Fig. 22: Removing the CPU fan
3. Remove the CPU cooler holder.
Fig. 23: Removing the CPU cooler holder
iDesign Disassembly Manual - 11