Packard Bell JUPITER Disassembly Manual - page 9
Jupiter Disassembly Manual version 1.0
--------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------- [
Page 9 of 11 ]
Product Support Consumer for NEC Computers International B.V. © 2004
42. Remove screw (1 x screw M) from left speaker assembly (right side on photo)
43. Disconnect touchpad cable from touchpad
44. Push out touchpad to disconnect it from top cover
45. Remove touchpad cable from touchpad
46. Remove screws from touchpad button board (3 x screw A)
47. Disconnect flat cable from touchpad button board
48. Remove screws (3 x screw K) of button board
49. Remove button board
50. Disconnect button board flat cable
(Re-)assembly Notes
Battery Connector Cover (put it back on when re-assembling)