Summary of MX
Page 1
Packard bell easynote mx disassembly manual.
Page 2: Table of Contents
11111 packard bell easynote mx disassembly manual 1 table of contents overview ................................................................................................................................................ 2 technician notes ............................................................
Page 3: Overview
Packard bell easynote mx disassembly manual 2 overview this document contains step-by-step disassembly instructions for the packard bell easynote mx. The instructions are illustrated where necessary with images of the part that is being removed or disassembled. Packard bell reserves the right to mak...
Page 4: Hazardous Voltage
Packard bell easynote mx disassembly manual 3 hazardous voltage there is hazardous voltage present inside the notebook when it is connected to an ac supply, even when the notebook’s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, contact an au...
Page 5: Battery
44444 packard bell easynote mx disassembly manual 4 battery perform the following steps to remove the battery: 1. Make sure the power is off. 2. Turn the notebook upside down. Note: use an anti-static mat or something soft like a piece of cloth underneath the notebook to prevent damage to the exteri...
Page 6: Optical Disk Drive
55555 packard bell easynote mx disassembly manual 5 4. Remove the 4 screws on the metal bracket to separate it from the hard disk drive. Fig. 3 location of hard disk drive bracket screws. Optical disk drive to remove the cd-rom or dvd drive, first remove the battery (see battery ), remove the hdd co...
Page 7: Memory
66666 packard bell easynote mx disassembly manual 6 2. Disconnect the wireless antenna cables. Fig. 5 location of wlan antenna cable connectors. 3. Release the 2 metal clips securing the wlan card. Fig. 6 releasing metal clips. 4. Take out the wlan card from the slot. Memory to remove the memory ins...
Page 8: Processor
77777 packard bell easynote mx disassembly manual 7 2. Release the metal clips securing the memory module(s) and remove the module(s). Fig. 7 removing memory module. Processor to remove the cpu, first remove the battery (see battery ) and then perform the following steps: 1. Remove the 7 screws reta...
Page 9: Keyboard
88888 packard bell easynote mx disassembly manual 8 4. Remove the 4 screws securing the heat sink in designated order. Fig. 9 location of heat sink screws. 5. Remove the heat sink. 6. Turn the screw in the cpu socket 180 degrees to release the cpu. 7. Take out the cpu. Keyboard to remove the keyboar...
Page 10: Lcd Screen Assembly
99999 packard bell easynote mx disassembly manual 9 4. There are 4 small slots at the location shown in fig. 11 ; insert a small flat-blade screwdriver in each slot to unlatch the keyboard. Fig. 11 location of latches securing keyboard cover. 5. Tilt the keyboard gently forward. 6. Before removing t...
Page 11
1010101010 packard bell easynote mx disassembly manual 10 4. Remove the 4 hinge screws on the back of the notebook securing the lcd screen. Fig. 13 location hinge screws. 5. Remove the middle hinge cover. 6. Carefully disconnect the 2 (white) block connectors. Fig. 14 location of block connectors an...
Page 12: Main Board
1111111111 packard bell easynote mx disassembly manual 11 11. Lift away the lcd screen assembly. Main board to remove the main board, first remove the battery (see battery ), the hdd (see hard disk drive ), the cd- rom or dvd drive (see optical disk drive ), the wireless network card (see wlan card ...
Page 13: Modem
1212121212 packard bell easynote mx disassembly manual 12 5. Remove the 8 remaining screws from the bottom plate. 6. Remove the dummy card (optional) from the card reader and/or the expresscard slot. 7. Carefully remove the top cover. Note: the top cover has been clicked into place; you might need t...
Page 14: Bluetooth (Optional)
1313131313 packard bell easynote mx disassembly manual 13 bluetooth (optional) to remove the optional bluetooth module, first remove the battery (see battery ), the hdd (see hard disk drive ), the cd-rom or dvd drive (see optical disk drive ), the wireless network card (see wlan card ), the installe...
Page 15: Speakers
1414141414 packard bell easynote mx disassembly manual 14 2. Disconnect the 2 flat cables and separate the part from the top cover (see fig. 22 ). Note: the touchpad area and the buttons are separate parts: the touchpad area is part of the top cover. To replace the touchpad area, disconnect all flat...
Page 16: Lcd Panel
1515151515 packard bell easynote mx disassembly manual 15 2. Remove the 3 screws securing the subwoofer (one of the screws is not visible in fig. 25 ). Fig. 25 location of subwoofer screws. 3. Remove the subwoofer assembly. Lcd panel to disassembly the lcd panel, first remove battery (see battery ),...
Page 17: Inverter Board
1616161616 packard bell easynote mx disassembly manual 16 5. Remove the 8 screws securing the lcd and lift out the lcd panel. Fig. 28 location of screws securing lcd module. 6. Remove the 4 screws on each side of the bracket. 7. Remove the top support bracket (usually held in place by the left and t...
Page 18: Webcam Microphone/usb Cable
1717171717 packard bell easynote mx disassembly manual 17 webcam microphone/usb cable to remove the webcam microphone and the webcam usb cable, first remove battery (see battery ), the hdd (see hard disk drive ), the cd-rom or dvd drive (see optical disk drive ), the wireless network card (see wlan ...
Page 19: Notice
1818181818 packard bell easynote mx disassembly manual 18 notice the information in this guide is subject to change without notice. This guide contains information protected by copyright. No part of this guide may be photocopied or reproduced in any form or by any means without prior written consent...