Summary of NEC Versa E680
Page 1
Versa e680 disassembly manual.
Page 2
Nec versa e680/pb easynote e5 disassembly manual page 2 table of contents overview.................................................................................................................................................................3 technician notes..........................................
Page 3
Nec versa e680/pb easynote e5 disassembly manual page 3 overview this document contains step-by-steps disassembly instructions for the versa e680 chassis. The instructions are illustrated where necessary with images of the part that is being removed or disassembled. Furthermore, the screws that are ...
Page 4
Nec versa e680/pb easynote e5 disassembly manual page 4 hazardous voltage there is hazardous voltage present inside the computer when it is connect to an ac supply, even when the computer’s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, conta...
Page 5
Nec versa e680/pb easynote e5 disassembly manual page 5 removing the battery perform the following steps to remove the battery: 1. Make sure to power off the versa e680. 2. Turn the unit upside down. 3. Unlock the battery and slide it out of its place as the arrow shows in fig. 1 fig. 1 removing the...
Page 6
Nec versa e680/pb easynote e5 disassembly manual page 6 removing the hard disk drive to remove the hard disk drive, first remove the battery (see removing the battery ), then perform the following steps: 1. Remove the screws as shown in fig. 2 fig. 2 removing the hard disk drive cover 2. Release scr...
Page 7
Nec versa e680/pb easynote e5 disassembly manual page 7 3. Disconnect and lift up the hard disk module as shown in fig. 4 fig. 4 disconnecting the hard disk drive 4. Unscrew the four screws on both sides of the hard disk drive as shown in fig. 5 fig. 5 unscrewing the hard disk drive bracket screws m...
Page 8
Nec versa e680/pb easynote e5 disassembly manual page 8 removing the memory module to remove the memory module, first remove the battery (see removing the battery ), then perform the following steps: 1. Release the one screw retaining the memory module cover. Fig. 6 removing the screw retaining the ...
Page 9
Nec versa e680/pb easynote e5 disassembly manual page 9 removing the wireless lan to remove the wireless module, first remove the battery (see removing the battery ), then perform the following steps: 1. Remove the screw retaining the mini pci slot cover as shown in fig. 8 fig. 8 removing the screws...
Page 10
Nec versa e680/pb easynote e5 disassembly manual page 10 removing the cpu to remove the cpu, first remove the battery (see removing the battery ), then perform the following steps: 3. Remove the screw retaining the cpu cover as shown in fig. 10 fig. 10 removing the screws retaining cpu cover 4. Remo...
Page 11
Nec versa e680/pb easynote e5 disassembly manual page 11 5. Unlock cpu from cpu socket and lift up the cpu carefully. Fig. 12 unlock cpu.
Page 12
Nec versa e680/pb easynote e5 disassembly manual page 12 removing the optical disk drive to remove the odd, first remove the battery (see removing the battery ), then perform the following steps: 1. Remove the screws retaining the optical drive as shown in fig. 13 fig. 13 releasing the optical drive...
Page 13
Nec versa e680/pb easynote e5 disassembly manual page 13 removing the keyboard to remove the keyboard, first remove the battery (see removing the battery ), then perform the following steps: 1. Push the keyboard cover from battery compartment as shown in fig. 14 fig. 14 releasing the keyboard cover ...
Page 14
Nec versa e680/pb easynote e5 disassembly manual page 14 3. Lift up the keyboard and disconnect it from the system as shown in fig. 16 fig. 16 disconnect keyboard flat cable removing the main board to remove the main board , first remove the battery (see removing the battery ), remove keyboard (see ...
Page 15
Nec versa e680/pb easynote e5 disassembly manual page 15 2. Disconnect all cable connection located near to left speaker as shown in fig. 18 fig. 18 lcd cable and left speaker connection 3. Disconnect touch pad connection as shown in fig. 19 fig. 19 touch pad connection.
Page 16
Nec versa e680/pb easynote e5 disassembly manual page 16 4. Flip over unit and release all screws as shown in fig. 20 fig. 20 removing the top cover screws 5. Carefully lift up, release the top cover, and put it aside. 6. Unscrew screws on mdc modem module and disconnect it before lift up mdc modem....
Page 17
Nec versa e680/pb easynote e5 disassembly manual page 17 7. Unscrew screws all screws shown in fig. 22 and disconnect right speaker connection on main board. Fig. 22 screws on main board 8. Lift up main board as shown in fig. 23 fig. 23 lifting up main board a = m5x2.5 sliver b = m6x2 black c = m2.5...
Page 18
Nec versa e680/pb easynote e5 disassembly manual page 18 note 1: when lifting up main board bewares the coil, attach on the wireless antenna. Note 2: make sure wireless antenna are properly place in correct location when assemble..
Page 19
Nec versa e680/pb easynote e5 disassembly manual page 19 removing the lcd module to remove lcd module first remove main board (see removing main board ), then perform the following steps: 1. Release screws show in fig. 24 fig. 24 removing screws retaining lcd module 2. Carefully lift up the lcd modu...
Page 20
Nec versa e680/pb easynote e5 disassembly manual page 20 removing the lcd panel to remove the lcd panel, first remove the lcd module (see removing the lcd module ), then perform the following steps: 1. Use pin to remove rubber cover on the lcd module as shown in fig. 25 fig. 25 removing the rubber c...
Page 21
Nec versa e680/pb easynote e5 disassembly manual page 21 3. Unscrew all screws circled in fig. 27 and disconnect lcd back light cable from inverter board before lift up lcd penal. Fig. 27 removing the lcd panel screws 4. Remove the screws at both sides of the lcd panel in order to release the lcd hi...
Page 22
Nec versa e680/pb easynote e5 disassembly manual page 22 5. Remove the screws at both sides of the wireless antenna as shown in fig. 29 , release the wires from the adhesive tapes and put the wireless antenna aside. Fig. 29 removing wireless antenna 6. Remove the screws on lcd module holder at both ...
Page 23
Nec versa e680/pb easynote e5 disassembly manual page 23 removing the touch pad to remove the touch pad, first remove the top cover (see removing the top cover ), then perform the following steps: 1. Unscrew the screws on the top cover as shown in fig. 32 fig. 32 top cover 2. Carefully separate touc...
Page 24
Nec versa e680/pb easynote e5 disassembly manual page 24 removing the speaker assembly to remove the speaker assembly, first open up the keyboard cover (see removing keyboard ), remove bottom cover (see removing main board ) the perform the following steps: 1. Remove the screws holding speaker assem...
Page 25
Nec versa e680/pb easynote e5 disassembly manual page 25 screws m3.5x2 black m6x2.5 black m4x3 silver m10.5x2 sliver m4.5x3.5 black m3x2 sliver m5x2.5 sliver m6x2 black m2.5x10 silver m4.5x2.5 sliver m3.5x2.5 sliver m4.5x2 black m3.5x2 sliver notice the information in this guide is subject to change...
Page 26
Nec versa e680/pb easynote e5 disassembly manual page 26 copyright © 2004 nec computers international bv. All rights reserved. Nec is a trademark of nec computers international bv. The names of actual companies and products mentioned herein may be trademarks and/or registered trademarks of their res...