1 pakedgedevice&software inc se-5-ep/se-8-ep 5 port & 8 port poe powered gigabit ethernet switch user manual – version 1.0
2 ce mark warning this equipment complies with the requirements relating to electromagnetic compatibility, en 55022 class a for ite, the essential protection requirement of council directive 89/336/eec on the approximation of the laws of the member states relating to electromagnetic compatibility. F...
3 introduction: the se-5-ep / se-8-ep are compact, high-performance gigabit ethernet switches equipped with five to eight auto-speed-sensing 10/100/1000mbps ports. The switch will automatically negotiate with its connected partners on the network speed and duplex mode. The se-5- ep / se-8-ep are per...
4 definition and guide: led definitions: led status operation power steady blue power is on off power is off link/act steady blue port connected blinking blue the port is transmitting/receiving data cable selection guide: network speed cable type max. Length 10mbps cat. 3, 4, 5 utp/stp 328 feet (100...
5 specification: standard ieee 802.3 10base-t ieee 802.3u 100base-tx ieee 802.3ab 1000base-t ieee 802.3x full duplex operation and flow control interface 5* 10/100/1000mbps rj-45 gigabit ethernet ports 8* 10/100/1000mbps rj-45 gigabit ethernet ports uplink auto mdi/mdi-x（auto crossover） network spee...
6 technical support: please visit our website for up-to-date support information: website: www.Pakedge.Com email: support@pakedge.Com contact information: 3847 breakwater avenue hayward, ca 94545-3606 u.S.A © pakedge device & software inc. 2015 – all rights reserved.
