Pacvac Prolite Product & Training Manual
Commercial Back Pack
Vacuum Cleaner
Revised: January 2013
www.pacvac.com
Support: 08 9479 1444
www.pacvac.com
Support: 08 9479 1444
Part No. UA908
Combination floor tool
Part No. UA9272
Bottom plate to suit
combination floor tool
Part No. UA917H
All purpose floor tool
Part No. UA926
Turbo head
Part No. UP112PB
Plug in RCD adaptor
Part No. UA908W
Combination floor
tool with wheels
Part No. KC909
Extendable wand
Part No. UA913M
Metal bent hand piece
NOTE: Not suitable for
commercial use
13. Parts Profile
Quote these part numbers when ordering spare parts
No. Part Name
Part No.
1.
Dome lid
KC251
2.
Dust bag flat bottom
P502
3.
Prolite filter (Packet of 5)
KC522A5
4.
Filter retainer
KC522
5.
Main vacuum canister
KC252P
6.
Motor gasket foam
KC253B
7.
Motor 240v 1300W single stage flow through
G118
8.
Motor spacer
KC253S
9.
Motor gasket
KC253
10.
Intermediate noise insulation
P254
11.
Intermediate housing
KC256P
12.
Switch rocker 12A 250V 5E4
VS261
13.
Screw pan plastite 5x20
N/A
14.
Noise insulation motor
P255
15.
Noise insulation bottom lid
P255B
16.
Screw pan plastite 3x12
PV299
17.
Cable clamp
KC262
18.
Motor filter cage
KC264
19.
External noise insulation
P259
20.
Screw ST 6x25
N/A
21.
Bottom cap
KC258
22.
Cable grommet
KC406
23.
Power cord 15m 10A 2c 1mm2 (AU, NZ)
KC111
Power cord 15m 10A 2c 1mm2 (UK, SG, IN, AE)
KC108UK
Power cord 15m 10A 2c 1mm2 (EU)
KC108EU
24.
Bolt 5x20
N/A
Nut 5mm nyloc
N/A
Washers 3/16 x3/4 & 3/16 x7/16
N/A
25.
Carrying frame
KC120
26.
Shoulder strap pair
KC121
27.
Cord restraint
KC268
28.
Back support padding
KC263
29.
Hose complete 32mm 1.2m
KC32PRO
30.
Two piece wand
KC9092
31.
Crevice tool
KC911
32.
KC floor tool
KC908W
www.pacvac.com
Support: 08 9479 1444
Product & Training Manual
Service & Help
For service and help contact Pacvac on 08 9479 1444
or visit our website at www.pacvac.com for a list of your nearest
Gold Level Retailers and Service Centres.
Support: 08 9479 1444
www.pacvac.com
Read the instruction manual before using the machine.
Retain for future reference.
Original
Instructions
Caution: Always unplug the back pack before attempting to solve a problem
or when servicing
11. Troubleshooting
10. Operate Right
How to vacuum easier and faster with no back strain.
1. Stand upright, with the bent hand piece section parallel to the floor.
2. Hold the bent hand piece with one hand at a comfortable arm’s length.
3. Move forward and away from the power point.
4. Use easy underarm swinging motion when detail cleaning and short dabs when spot
cleaning, always standing upright.
5. Once the end of the power cord has been reached and work completed, return to the
power point along the cord line and disconnect the power cord from the power point.
6. If work is not completed move to the next area, connect power cord to the nearest power
point and repeat steps 1 through 6.
7. Remove back pack by sliding the one of the straps off the shoulder, while raising the other
arm/shoulder to hold strap in place. Slowly lower the shoulder and lower the back pack to
the floor, do not drop.
8. If work is completed disconnect power cord from power point then wind from the back pack
towards the end of the power cord to reduce likelihood of cable twists. In the process check
for nicks, cuts, fractures, and knots.
4
6
PROBLEM:
CAUSE:
SOLUTION:
Back Pack not working
Power cord not firmly plugged
into power point.
Check plug is firmly plugged in.
Back pack shuts off due to
high motor temperature.
Turn main switch off and unplug
the back pack. Conduct safety and
maintenance checks found in the
Product and Training Manual or as
per labelling on the machine. After
60 the back pack should be ready
for use. If not contact the number
below for your nearest Authorised
Pacvac Service Agent.
Circuit breaker or RCD has
tripped.
Reset circuit breaker or RCD.
Back Pack as no/poor
suction
Dust bag is full.
Remove, empty and clean dust bag.
Dust bag not installed
correctly.
Remove and empty dust bag making
sure the rubber edging is correctly
fitted around the canister.
Hose not installed correctly.
Reconnect hose and ensure
correctly sealed.
Blockages.
Remove hose, wand and floor tools;
remove any blockages.
Filters blocked.
Clean Hypercone HEPA filter and
external motor filter.
Product Number: 201006-002A
Specifications
Volts / Frequency: 220-240V~50Hz
Motor: 1300W Single Stage Flow Through
Noise Level: 66dB(A) ± 3dB(A) (at 1.5m)
Filtration: 3 stage
Airflow Volume: 39 litres per sec
Tank: Capacity: 6 litres
Weight: 4.6kgs (excluding power cord and hose)
15. Notes
14. International Authorised Distributors
INDIA
Inventa Cleantec Pvt Ltd
C-31 Sector 63
NOIDA
Distt. Gautam Budh Nagar 201 301
INDIA
Ph: + 91 120 2401086
Fax: + 91 120 2401087
Web: www.inventacleantec.com
JAPAN
Bl Corporation
6-62-12 Shibayama
Funabashi-shi, Chiba-Ken 274-0816
Japan
Ph: + 81 47 464 1462
Fax: + 81 47 464 1477
Web: www.bicorp.co.jp
NEW ZEALAND
Proquip NZ Ltd
47 Fitzherbert Street,
Petone
Wellington
New Zealand
Ph: + 64 4 566 7847
Fax: + 64 4 576 0430
Web: www.cleangear.co.nz
NORWAY
Viking Cimex AS
Prof. Birkelandsvei 24 A-1
1081 Oslo
Norway
Ph: 47 22 79 35 35
Fx: 47 22 79 35 40
Web: www.skovly.no
SINGAPORE
Klenco (Singapore) Pte Ltd
18 Gul Crescent,
Singapore 629527
Ph: + 65 6862 3388
Fax: + 65 6861 7575
Web: www.klenco-asia.com
SLOVENIA
Klimatehnik d.o.o.
Brnciceva ulica 13
1231 Ljubljana
Slovenia
Ph: +386 4 180 5004
Fax: +386 1 781 6040
Web: www.klimatehnik.si
SOUTH AFRICA
Industro Clean
1490 Zeiss Road
Lazer Park
Honeydew
South Africa 2125
Ph: +27 11 801 4600
Fax: +27 11 794 3504
Web: www.industroclean.co.za
UNITED KINGDOM
TML International Ltd
Woodlands
Copmanthorpe Grange
Copmanthorpe
York Y023 3TN
United Kingdom
Ph: +44 (0) 1904 744790
Fax: +44 (0) 1904 744010
Web: www.tmlint.com
UNITED STATES OF AMERICA
TTI Floorcare North America
7005 Cochran Road
Glenwillow, OH 44139
United States of America
Ph: +1 440 996 2178
Fax: +1 440 996 2026
Web: http://ttifloorcare.com
AUSTRALIA:
For your nearest Australian Retailer/Service Centre contact:
Pacvac Pty Ltd
182 Daly Street, BELMONT, 6104
WESTERN AUSTRALIA, AUSTRALIA
Ph: + 61 8 9479 1444
Fax: + 61 8 9478 5444
Email: sales@pacvac.com
Web: www.pacvac.com
Optional Extras
1
2
3
4
5
6
7
8
9
10
11
12
13
14
16
17
22
21
20
19
18
15
23
24
25
26
27
28
29
30
31
32
12. Service Requirements
Our products are designed and built to be functional and durable. As a result, if you maintain
your vacuum cleaner as instructed, it is unlikely to require servicing. For information on use
and maintenance please read the Product and Training Manual thoroughly. Should you require
servicing we recommend our Pacvac Gold Level Service Centres. For your nearest centre visit
www.pacvac.com, alternatively contact Pacvac on 08 9479 1444 or e-mail sales@pacvac.com.