PageFlip butterfly User Manual - page 21
PageFlip Butterfly User Guide 9. FREQUENTLY ASKED QUESTIONS
chopping off the binding and scanning the pages.
Can I connect other foot pedals to the PageFlip Butterfly to trigger
page turns?
The PageFlip Butterfly does not support external pedals. Please consider
our PageFlip Firefly pedal if you wish to use external pedals. The Firefly
is equipped with L/R jacks that accept 1/8" mono plugs from other foot
pedals. Please visit us at
www.pageflip.com
for additional information.
Why are the LEDs not lit when I turn on the PageFlip Butterfly?
Make sure to install two fresh AA batteries in the pedal.
What is the current pedal mode?
An LED is lit next to the current mode setting of the pedal. Simply press
a different mode button to change the setting. The LED will turn off once
the PageFlip Butterfly enters sleep mode after 30 minutes of inactivity.
Why is the pedal not turning pages?
Confirm that the device “Dual Pedal” is paired to your computer and that
the correct pedal mode is selected. Some software may require arrow
keys while others may require PageUp/PageDown or other keystrokes.
Try several modes until you find one that works. Note that if you use unre-
alBook on the iPad, you must go to the app’s settings (tap the gear icon)
and set Network->BT Keyboard Connected to ON. NextSong switches can
be left OFF. The app will then respond to the Up/Down Arrow keys.
Why is the pedal not turning pages on the unrealbook app?
Confirm that the device "Dual Pedal" is paired to your computer and that
the Up/Down arrow mode is set on the pedal. This is indicated by a blink-
ing light next to the middle (third) mode button. Then, make sure you go
to the app’s settings (tap the gear icon) and set Network->BT Keyboard
PageFlip, Inc.
19
www.pageflip.com