PageOne HS200CV Instructional Manual - page 9

Page 7

The second line displays No Unread

Messages or 1 Unread Message to show how

many messages have been received but not

viewed.  Sometimes, another message,

Memory Full may alternate with the message

status.  This means that the memory is almost

full and the next message may overwrite the

oldest read message.

The third line shows the status of the alert;

Silent to warn that the audible alert has been

turned off or No Vibrate to show that the

vibrate alert has been turned off.  When both

audible and vibrate alerts are turned off, Silent

and No Vibrate alternate at 2 second intervals.

If nothing is displayed, both audible and vibrate

alert are turned on.

The bottom line may display Replace Battery

to indicate that the battery is low and should be

changed as soon as possible.  Radio Off may

also be displayed on the bottom line.  This is a

special battery saving feature.  Some MITs are

programmed to display Out Of Range on the

bottom line when they are out of range of a

transmitter.

Switching Off Your MIT Message Pager

When the standby screen is displayed, press

and release the > button.  The options screen

will now be displayed.