1. DL manuals
  2. Paitec
  3. Office Equipment
  4. ES-2000
  5. User Manual

Paitec ES-2000 User Manual

Manual is about: Pressure Sealer

Summary of ES-2000

  • Page 1

    Model es-2000 user manual this manual provides detailed information on how to operate and maintain your es-2000. Please read this manual before operating the machine in order to prevent any damage caused by improper handling.

  • Page 2: Copyright

    - 2 - introduction thank you for purchasing paitec usa product. This manual is prepared to provide you with guidelines on how to properly operate and maintain the es-2000 pressure sealer. Copyright any of the contents should not be copied, re-printed or translated by other languages without paitec u...

  • Page 3: Specifications:

    - 3 - es-2000specifications. The es-2000 offers a real office-friendly pressure sealer with perfect sealing quality and extremely low noise level. It is capable of processing 2,000 forms per hour. • form size : a4 / letter / legal size • speed : 2,000 forms / hour • input tray : up to 150* forms • f...

  • Page 4: Content

    - 4 - unpacking your machine [2 nd cassette, stacker & power cable] [box open] content please check if all of the following parts are included in the box – power cable, 1 st fold cassette, 2 nd fold cassette, stacker, user manual ( 1 st fold cassette is already inserted onto the machines from the fa...

  • Page 5

    - 5 - identifying parts 2 paper guide adjust to fit into your form size (wide) 3 power socket main power socker located on the back of the machine. 4 2 nd fold cassette insert the 2 nd cassette on the back of the machine. 5 roller cover open fold roller cover when jam occurs. (please turn the knob i...

  • Page 6: Remove The 2

    - 6 - folding cassette guide 안전 테이프 및 보호 스티로폼 제거하기 기기를 작동하기 전에 모든 안전 테이프와 보호 스티로폼을 제거 하십시요. 안전 테이프 및 보호 스티로폼 제거하기 기기를 작동하기 전에 모든 안전 테이프와 보호 스티로폼을 제거 하십시요. A fold cassette setting guide with ruler is attached on the front of the hopper. Please select the folding type you require and adjust the 1 st a...

  • Page 7: And 2

    - 7 - how to install the fold cassettes please follow the these instructions to adjust the fold 1 st and 2 nd fold cassettes. 안전 테이프 및 보호 스티로폼 제거하기 기기를 작동하기 전에 모든 안전 테이프와 보호 스티로폼을 제거 하십시요. 안전 테이프 및 보호 스티로폼 제거하기 기기를 작동하기 전에 모든 안전 테이프와 보호 스티로폼을 제거 하십시요. Knob for fold cassette adjustment 1. The 1 st ca...

  • Page 8: Folding Plate Based On The

    - 8 - different folding cassettes for different paper sizes 안전 테이프 및 보호 스티로폼 제거하기 기기를 작동하기 전에 모든 안전 테이프와 보호 스티로폼을 제거 하십시요. The es-2000 has a 3 different size of 1 st folding plate based on the folding type required. Standard (148mm plate) 240mm plate 270mm plate option basic option option fold type ...

  • Page 9: Paper Jam Detection : This

    - 9 - features 안전 테이프 및 보호 스티로폼 제거하기 기기를 작동하기 전에 모든 안전 테이프와 보호 스티로폼을 제거 하십시요. 안전 테이프 및 보호 스티로폼 제거하기 기기를 작동하기 전에 모든 안전 테이프와 보호 스티로폼을 제거 하십시요. • paper jam detection : this sensor will detect a paper jam and stop the machine. • please note you will have to remove the jammed form before restarting the m...

  • Page 10

    - 10 - loading & operation 안전 테이프 및 보호 스티로폼 제거하기 기기를 작동하기 전에 모든 안전 테이프와 보호 스티로폼을 제거 하십시요. 안전 테이프 및 보호 스티로폼 제거하기 기기를 작동하기 전에 모든 안전 테이프와 보호 스티로폼을 제거 하십시요. Fan the pressure seal forms to separate and to eliminate any static that may have been caused by the laser printer. Place the forms into the paper ...

  • Page 11: Loading The Paper Hopper

    Loading the paper hopper - 11 - it is important that you load the paper hopper correctly to minimize the risk of paper jams occurring. Fan the pressure seal forms to separate and to eliminate any static that may have been caused by the laser printer. Too much gap! Adjusting the hopper paper guides t...

  • Page 12

    - 12 - jam removal you can easily remove a paper jam as illustrated below. If a paper jam has occurred, the machines will automatically stop after a few seconds. After removing the paper jam, simply press the “red : start” button for the machine to restart. [pull the 1 st cassette back] [remove the ...

  • Page 13: 1. Paper Dust

    - 13 - operator maintenance 안전 테이프 및 보호 스티로폼 제거하기 기기를 작동하기 전에 모든 안전 테이프와 보호 스티로폼을 제거 하십시요. 안전 테이프 및 보호 스티로폼 제거하기 기기를 작동하기 전에 모든 안전 테이프와 보호 스티로폼을 제거 하십시요. Since pressure seal forms leave paper dust as well as ink and toner residues, it is very important to occasionally clean the surface of the each r...

  • Page 14

    Division of pai trading, inc. Headquarter & factory 15951 sw 41 st street #400 davie, fl 33331 www.Paitec.Com paitec@paitec.Com.