Paitec ES3000 User Manual - Job Sep(Auto Start) Mode
Manual is about: Pressure sealer
of
27
- 14 -
OP panel guide-5
Job Sep(Auto Start) Mode
1. Check the „Ready State‟ of the OP Panel.
2. Adjust the fold-position of the 1
st
and 2
nd
CST by using the setting guide of the fold-
position[Page 11].
3. Press the [ASM] button after activating the
„batch mode‟ at the first.
3. Check the LED lamp of ASM on the panel is turned on.
4. To press the [ASM] button once again for deactivating the ASM option..
Ready
7
A10
0
[Batch mode + Job Sep]
TIP. Batch + Job Sep function
If the „Batch mode‟ is using with „Job sep‟, batched working is operating continuously with
3-seconds-interval.