Pakedgedevice&software inc quick start guide re-1/re-2 router enterprise-class, audio/video router version 1.0
Pakedgedevice&software inc contents overview .............................................................................................................................................................3 package contents ..................................................................................
Pakedgedevice&software inc overview the re-1 and re-2 are enterprise grade audio/video routers that are designed to minimize installation times through an intuitive gui. See the table 1 below for more information. Table 1’s description of the led’s applies to both the re-1 and re-2. Table 1: led exp...
Pakedgedevice&software inc below you will find a description of the interfaces on the back of the re-1 and re-2 in table 2 . Table 2: interface explanation (from left to right) *the usb 1 interface can also be used for file sharing, but will be limited to the slower usb 2.0 speeds t able 3 illustrat...
Pakedgedevice&software inc installing the router 1. If mounting the router in a standard 19” av rack, attach the rack-mounting brackets that come with the router to the sides. If not rack-mounting, ensure that the router is physically mounted near power and network connections. 2. Connect power to t...
Pakedgedevice&software inc dhcp: by default, the router will connect to the internet using dhcp. If your isp uses dhcp, you may need to reset the modem to get internet access. If you are using a modem that has a router built into it, you may have to configure dmz settings to allow complete functiona...
Pakedgedevice&software inc 3. Select static address for the protocol. 4. Click on switch protocol. 5. Enter the ip address from your isp. Select the appropriate subnet mask from your isp. You can select custom to enter a custom subnet mask. Then enter your default gateway and dns server. Leave the o...
Pakedgedevice&software inc pppoe: to configure the router using a pppoe connection, you will need to complete the following steps: 1. Hover your mouse towards the top of page to see the menu. Click on network zones. 2. Click on edit under wan zone. 3. Select pppoe from the protocol drop down menu. T...
Pakedgedevice&software inc 4. Enter the username that the isp assigned under the pap/chap username field. Enter the password in the pap/chap password field. Click apply when finished. The router is now setup for pppoe. Changing the lan ip the default ip address of the router is 192.168.1.99. If you ...
Pakedgedevice&software inc 3. Enter the new ip address you wish to use in the ip address field. In the following example we change the ip address of the router to 192.168.1.1. 4. Click apply towards the bottom to finalize the settings. Troubleshooting and support if you are unable to get the router ...
