Pakedgedevice&software inc se-18/se-26 16/18 port unmanaged gigabit ethernet switch with two independent gigabit sfp ports user manual – version 1.0
Ce mark warning this equipment complies with the requirements relating to electromagnetic compatibility, en 55022 class a for ite, the essential protection requirement of council directive 89/336/eec on the approximation of the laws of the member states relating to electromagnetic compatibility. Fcc...
1 unpacking information thank you for purchasing this product. Before installation, please verify that your package contains the following items. 1. One 16/24-port gigabit switch with 2 sfp ports 2. One ac power cord 3. Rack-mount brackets and screws (included, optional use) 4. User ’s manual introd...
2 key features complies with 10 base-t specifications of the ieee802.3 standard complies with 100base-tx specifications of the ieee802.3u standard complies with 1000base-t specifications of the ieee802.3ab standard provides 16/24 10/100/1000mbps ethernet ports provides 2 100/1000mbps sfp p...
3 front panel the front panel consists of led indicators. 24 ports + 2 sfp 16 ports + 2 sfp the following table describes the leds on the front panel. Leds definition : this switch contains leds to shows the activities and information of the ports, including power led and link/act leds. Led status o...
4 rear panel the back side is shown as bellow. 24 ports + 2 sfp 16 ports + 2 spf the following table describes the port labels on the rear panel. Ports operation the auto-negotiation feature allows ports running at one of the following operation modes: port media speed (mbps) duplex mode 10/100/1000...
5 cord firmly into the receptacle of the switch and the other end into an electric service outlet. After the power cord installation, please check if the power led is illuminated for a normal power status. Installation this switch can be placed on your desktop directly, or mounted in a rack. The ins...
6 unit. 6. Insert the unit into the rack with suitable screws. 7. Reconnect all the cables. Network cables 1. Crossover or straight-through cable: all the ports on the switch support auto-mdi/mdi-x functionality. Both straight-through or crossover cables can be used to connect the switch with pcs as...
7 product specifications standard ieee802.3 (10base-t) ieee802.3u (100base-tx) ieee802.3ab (1000base-t) ieee802.3x full-duplex flow control ieee802.1p class of service, priority protocols ieee802.3az (energy efficient ethernet) interface 16/24 10/100/1000mbps rj-45 ports 2* sfp ports cable connectio...
8 technical support: please visit our website for up-to-date support information: website: www.Pakedge.Com email: support@pakedge.Com contact information: pakedge device & software inc. 3847 breakwater avenue hayward, ca 94545 u.S.A © pakedge device & software inc. 2015 – all rights reserved.
