Pakedgedevice&software inc se-8p4 8 port gigabit unmanaged switch with 4 ports poe or 2 ports poe+ user manual - version 1.0
Fcc certifications this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment...
1 unpacking information thank you for purchasing the pakedge device & software se-8p4 gigabit switch. Before installation, please verify that your package contains the following items. 1. One 8-port gigabit ethernet with 2-port poe+/4-port poe switch 2. One ac power cord 3. Rubber feet and screws 4....
2 ports(ieee802.3/ 802.3u/ 802.3ab) supports mdi/mdi-x auto crossover supports 63w max; full load: 31.5w(at) x 2p = 63w 15.4w(af) x 4p = 61.6w wire-speed packet filtering and forwarding rate store-and-forward architecture filters fragment & crc error packets supports extensive led indicato...
3 power receptacle to be compatible with the varying electric service standards around the world, the switch comes with a power supply which can operate from 100 to 240vac, 50/60hz. Please make sure that your outlet standard is within this range. To power on the switch, plug the female end of the po...
4 rack-mount installation rack mounting facilitates an orderly installation when a series of networking devices are installed. The switch is supplied with rack mounting brackets and screws procedures to rack-mount the switch: 1. Disconnect all the cables from the switch before continuing. 2. Place t...
5 product specifications standard ieee802.3 10base-t ieee802.3u 100base-tx ieee802.3x full-duplex flow control ieee802.3ab 1000base-t ieee 802.3af/at poe standard (dte power via mdi) interface 8*10/100/1000 mbps auto mdi/mdi-x rj-45 switching ports supports 63w max; full load: 31.5w(at) x 2 ports 15...
6 technical support please visit our website for up-to-date support information: website: www.Pakedge.Com email: support@pakedge.Com contact information: pakedge device & software inc. 3847 breakwater avenue hayward, ca 94545-3606 usa 877-274-6100 © pakedge device & software inc. 201 5 – all rights ...
