Pakedge device&software inc. Sw16-8pb 16 port fast ethernet with 8 port poe switch user manual version 1.2.
This equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment ge...
Unpacking information thank you for purchasing this switch. Before installation, please check that your package contains the following items. 1. One 8+8 10/100 poe switch 2. One power cord 3. User’s manual introduction general description the device is a powerful, high-performance fast ethernet swit...
Eliminates the effort constructing your network. You could easily connect a wireless ap or a voip phone to this switch without looking outlets for them. Over current protection and circuit shorting protection are also supported to ensure the safety. The switch is plug-n-play without any software to ...
Z supports mdi/mdi-x auto crossover z wire-speed packet filtering and forwarding rate z store-and-forward architecture filters fragment & crc error packets z supports extensive led indicators for network diagnostics z internal universal switching power supply z fcc class a, ce, vcci class a the fron...
System led: led status operation power steady blue the switch is powered on off the switch is powered off port leds led status operation 10/100m blue the port is connected blinking blue data transmitting /receiving. Off no valid link on this port poe blue one poe compliant device is connecting with ...
Power receptacle to be compatible with the electric service standards around the world, the switch is designed to afford the power supply in the range from100 to 240vac, 50/60hz. Please make sure that your outlet standard to be within this range. To power on the switch, please plug the female end of...
Beyond recommend moisture desktop installation 1. Install the switch on a level surface that can support the weight of the unit and the relevant components. 2. Plug the switch with the female end of the provided power cord and plug the male end to the power outlet. Rack-mount installation rack mount...
Installation of network cables 1. Crossover or straight-through cable: all the ports on the switch support auto-mdi/mdi-x functionality. Both straight-through or crossover cables can be used to connect the switch 2. Category 3, 4, 5 or 5e utp/stp cable: to make a valid connection and obtain the opti...
Product specifications standard ieee802.3 10base-t ieee802.3u 100base-tx ieee802.3af power over ethernet ieee802.3x flow control interface 16 * 10/100 mbps auto mdi/mdi-x rj-45 ports (port1~8 support poe power feeding) network data rate 10/100 mbps auto-negotiation transmission mode 10/100mbps full-...
Technical support please visit our website for up-to-date support information: website: www.Pakedge.Com email: support@pakedge.Com contact information: pakedge device & software inc. 1011 edwards road burlingame, ca 94010 © pakedge device & software inc. 2009 all rights reserved.
