Wap-c3n enterprise-class, ultra high throughput in-ceiling wireless-n access point and client bridge quick start installation quick guide – version 1.0
A. Wap-c3n default settings 1. Wireless access point mode 2. Ip address for access point mode-192.168.1.250 3. Username/password- pakedge/pakedgea 4. Ssid- pakedge1 5. Power output- high 6. Security- disabled b. Hardware installation (note: the installation steps listed below are highly abridged. Fo...
2 wap-c3n installation quick guide 2. To open cover, first slide the latch outward to disengage the tab and second, push in the cover on the red dot (outer edge of cover, directly opposite of the latch). 3. Use a phillips screw driver to engage the mounting-ears as shown in a clockwise rotation unti...
3 wap-c3n installation quick guide 5. Plug the other end of the ethernet cable into a poe injector or poe switch (see poe injector manual for completing the wiring at the poe injector location). Note: do not use a dc power supply as the housing was not designed to accommodate poe. The diagram below ...
4 wap-c3n installation quick guide c. Ip address configuration the default ip address of the wireless access point is 192.168.1.250. In order to log into this wap, you must first configure the tcp/ip settings of your pc/ notebook. For windows 7: 1. In the control panel, double click network connecti...
5 wap-c3n installation quick guide 3. Select use the following ip address radio button and then enter the ip address and subnet mask. Ensure that the ip address and subnet mask are on the same subnet as the device. For example: wireless access point ip address: 192.168.1.250 pc ip address: 192.168.1...
D. Login/configure the hardware 1. To access the wireless access point’s configuration screen, enter http://192.168.1.250 into your web browser. 2. The website of the wireless access point should appear as shown here. E. Client bridge, repeater and wds modes to access the other modes, click on prope...
© pakedge device & software inc. 2010 – all rights reserved 1163 triton dr. Foster city, ca 94404 usa visit us at: www.Pakedge.Com f. Technical support please visit our website for up-to-date support information: website: www.Pakedge.Com email: support@pakedge.Com.
