Pakedge NK-1 Quick Start Manual - page 4
of
8
4
4
Logging in
The NK-1-CP includes both the NK-1-NP Network Cloud Patroller and the NK-1-CG1 Wireless
Access Point.
1 Connect the NK-1 to power and press the power switch on the rear panel. The PWR LED will
light up.
2 Connect a computer to the NK-1 through an Ethernet cable. Enter 192.168.1.240 into the
address bar of your web browser. A login page opens.
3 In the usernamebox, type pakedge. In the password box, type pakedgen, then click Login.