- DL manuals
- Pakedge
- Network Router
- RB-KIT
- Installation Manual
Pakedge RB-KIT Installation Manual - page 27
RB-KIT INSTALLATION MANUAL
5 Subscription Services
One major difference between a basic “off the shelf” router and an enterprise security appliance is that
subscription services available at the enterprise level protect the network at the perimeter and do not allow
malware to reach your internal systems. Pakedge has created a custom profile that protects users from the
most common types of threats. This further adds to the plug and play simplicity of the Pakedge preconfigured
solution.
Pakedge’s Subscription Services include:
• Antivirus
• AntiSpam
• Web Filtering
• Intrusion Protection
• Fortinet Support
The RT-50S comes with a free 30 day subscription to these services, once the RT-50S is registered on the
Pakedge website. After the trial period, subscription to these services is available for a fee through Pakedge.
The order process is simple. All that is required is a Serial Number and an email address to automatically
deploy the subscription without any dealer intervention. Furthermore, friendly reminders will be sent to you to
indicate upcoming renewals. All subscriptions include 8x5 or 24x7 Fortinet support. Support contracts can also
be purchased individually as needed.
26
Summary of RB-KIT
Page 1
Rb-kit preconfigured enterprise-class router & security appliance installation manual – version 2.0
Page 2
Fcc declaration of conformity pakedge device & software, 1163 triton dr., foster city, ca, 94404, declares under sole responsibility that the rb-kit complies with 47 cfr parts 2 and 15 of the fcc rules as a class b digital device. This device complies with part 15 of fcc rules. Operation of the devi...
Page 3
Rb-kit installation manual safety precautions: when using this device, always follow basic safety precautions, to reduce the risk of fire, electric shock, and injury to persons, including the following: • read all of the instructions (listed here and/or in the user manual) before you operate this eq...
Page 4
Rb-kit installation manual **** warning **** no factory reset - the rb-kit was designed to be a very robust and exceptionally reliable product. Because of this, you will find the rt-50s does not have a hardware or software reset button. The product can either be remotely reset by pakedge, if the rou...
Page 5: Table of Contents
Rb-kit installation manual table of contents 1 introduction ............................................................................................................................... 5 1.1 package content .............................................................................................
Page 6
Rb-kit installation manual 1. Introduction the rb-kit is an integrated, all-in-one security router appliance that delivers enterprise-class multi-threat protection and routing for your home. It offers a full suite of security services in one hardened router platform: antivirus / antispyware / antima...
Page 7
Rb-kit installation manual this quick start guide only covers the basic setup. There is a separate advanced features user manual which covers the advanced features offered by pakedge (for latest advanced manual, please visit http:// www.Pakedge.Com/userguides.Php). Any additional configuration not l...
Page 8
Rb-kit installation manual 1.2 getting to know the rt-50s the front panel consists of led indicators. Description for front led’s: the router is powered on. The router is turned off. On during start-up or reboot. Normal operation. The correct cable is in use and the connected equipment has power. Ne...
Page 9
Rb-kit installation manual 1.2 getting to know the rt-50s the rear panel of the switch is laid out as follows: description for ports: internal wan1 and wan 2 console usb rj-45 rj-45 rj-45 usb 10/100 base-t 10/100 base-t 9600 bps ethernet ethernet rs-232-c usb 3-port switch connection to up to three ...
Page 10
Rb-kit installation manual 1.2 getting to know the rt-50s restore to factory defaults due to the nature of an enterprise gateway/security appliance, a standard reset to factory default button does not exist. Since the rt-50s is preconfigured, chances are a factory reset will not be required. However...
Page 11
Rb-kit installation manual 2 network configuration/setup overview 2.1summary of settings & ip address configuration 192.168.1.99 dynamic ip service dynamic ip service 192.168.1.110 to 192.168.1.210 internal interface wan1 interface wan2 interface dhcp server on internal interface network dhcp operat...
Page 12
Rb-kit installation manual 2.2 summary of setup 2.2.1 basic setup most installations will only require plugging in cables into the correct ports and setting up the desired internet connection (ie. Static, dynamic, etc) for an easy plug and play configuration. To complete the basic setup- follow the ...
Page 13
Rb-kit installation manual • port forwarding - is sometimes known as port mapping. This feature allows forwarding of a network port from the internet to a port on the internal network behind the router. This is needed if the user wishes to publish a web server or mail server inside the internal netw...
Page 14
Rb-kit installation manual 3 hardware installation 3.1 installing the router and switch 3.1.1 securing rv-50s in rmb-fg rack mount bracket remove rubber feet from rt-50s guide rt-50s router into rackmount bracket rmb-fg position rt-50s snug against bracket so face can be seen through bracket opening...
Page 15
Rb-kit installation manual use the supplied 4 x m3 screws to attach the rt-50s to the rmb-fg as shown plug in ac/dc power supply into router . Place velcro strips on power supply and attach to rack. Plug in power cord to av outlet 14.
Page 16
Rb-kit installation manual 4 broadband software configuration there are only a few settings that may need to be completed in the rt-50s router configuration before the router/switch kit is operational. The first router configuration is to setup your broadband internet connection. To do this, determi...
Page 17
Rb-kit installation manual 4.2 static ip to configure the rt-50s router to use a static ip complete the following steps: 1) determine the following information provided by the internet service provider: i) ip address ii) subnet mask iii) default gateway iv) dns server(s) 2) connect an ethernet cable...
Page 18
Rb-kit installation manual 5) click on network under system on the left hand side of the screen. Click on interface. 6) double click on the wan1 row 17.
Page 19
Rb-kit installation manual 7) click on the manual radio button under the addressing mode heading. Enter the ip address and subnet mask information provided by the isp, then click ok. We are using 100.100.100.100/255.255.255.0 as an example only. 18.
Page 20
Rb-kit installation manual 8) you are now connected to the internet. However to ensure the optimal performance, we recommend replacing the default dns settings with your isp’s dns settings. To add your isp’s dns information, log off user and login again using the adminstrator name - pakedge, and the...
Page 22
Rb-kit installation manual 10) type in the dns values that you received from your isp and then click apply. We are using 4.2.2.1 and 4.2.2.2 as an example only as seen below 21.
Page 24
Rb-kit installation manual 4.3 pppoe configuration to configure the router to use a pppoe connection you will need to complete the following steps: 1) determine the following information provided by the internet service provider: - pppoe username - pppoe password 2) connect an ethernet cable from th...
Page 25
Rb-kit installation manual 5) click on network under system on the left hand side of the screen. 6) in the wan1 row, click on the edit icon, it looks like a pencil and paper- see graphic below. 24.
Page 26
Rb-kit installation manual 7) click on the pppoe radio button under the addressing mode heading. Enter the username and password information provided by the isp. Click on ok. 8) the router is now configured to use a pppoe connection and is ready to be used. You can close the browser window. 25.
Page 27
Rb-kit installation manual 5 subscription services one major difference between a basic “off the shelf” router and an enterprise security appliance is that subscription services available at the enterprise level protect the network at the perimeter and do not allow malware to reach your internal sys...
Page 28
Rb-kit installation manual to activate your free 30 day antivirus/antispam/ips subscription and 90 day support and/or purchase additional annual virus subscription (see table below for options), please obtain the following information: a. Dealer address with country b. Dealer phone c. Dealer email d...
Page 29
Rb-kit installation manual 6 changing default passwords for security reasons, it is highly recommended to change the default passwords for the rt-50s. Be sure to record the changed passwords because there is no reset button if passwords are lost. There are two logons for this router: user for basic ...
Page 30
Rb-kit installation manual 3) select the username currently logged into the system. In this example, select the checkbox next to user. Then, select change password from the top menu. 4) type in the old password followed by the new password twice and then hit ok 5) repeat steps 1-4 for the second use...
Page 31
Rb-kit installation manual appendix a – troubleshooting faq’s 1- what is the difference between the standard fortigate 50b (rt-50f) and the pakedge preconfigured version (rt-50s)? - the pakedge preconfigured version of the fortgate-50b comes with a separate gui and logon from the full fortinet versi...
Page 32
Rb-kit installation manual appendix a – troubleshooting faq’s (continued) 4 - what is the rb-kit and what are the advantages of purchasing the product this way? - the rb-kit comprises of the rt-50s router/security application, and all necessary rack mount hardware to install the unit into an av rack...
Page 33: Rt-50S
Rb-kit installation manual appendix b specifications rt-50s hardware specifications lan / wan / dmz interfaces 3 / 2 / na networking features dhcp/pppoe client/server 1:1 nat static/dynamic routing* traffic shaping radius, ldap, active dir local db user group support system performance firewall/vpn ...
Page 34: Rt-50S
Rb-kit installation manual appendix b specifications (continued) rt-50s optional subscription services automatic and scheduled antivirus and ips updates url categorizing anti-spam rbl/surbl certifications icsa: firewall, ipsec, ssl, antivirus, ips compliance fcc class a, part 15, ul/cul, c tick, ce,...
Page 35
Rb-kit installation manual appendix c – technical support please visit our website for up-to-date support information: website: www.Pakedge.Com email: support@pakedge.Com phone- 1-650-385-8703 contact information: pakedge device & software inc. 1163 triton dr. Foster city, ca 94404 usa 34.
Page 36
Rb-kit installation manual appendix d – limited warranty model rb-kit congratulations on your purchase of a pakedge device & software wireless product! We believe pakedge designs and manufactures the finest home networking products on the market. With proper installation, setup, and care, you should...
Page 37
Rb-kit installation manual appendix d – limited warranty (continued) the foregoing limited warranty is pakedge’s sole warranty and is applicable only to products sold as new by authorized dealers. The remedies provided herein are in lieu of a) any and all other remedies and warranties, whether expre...
Page 38
Rb-kit installation manual appendix d – limited warranty (continued) 9.5 important: warranty registration please register your product at www.Pakedge.Com. It is imperative that pakedge knows how to reach you promptly if we should discover a safety problem or product update for which you must be noti...
Page 40
© pakedge device & software inc. 2010 – all rights reserved 1163 triton dr. Foster city, ca 94404 usa visit us at: www.Pakedge.Com.