PALI Novara Forever Crib Assembly Instructions Manual
customerservice@pali-design.com
www.pali-design.com
Assembly
Instructions
Novara Forever Crib
Pali Design, Inc.
1525 Hymus Boul.
Dorval, QC
H9P-1J5 Canada
1x
Crib Parts List:
Headboard (D)
1x
2x
1x
INSTRUCTION LEAFLET
Important, keep for future
reference. Read carefully.
IMPORTANT:
In
order
to
properly
assemble the crib, carry out the operations in
the order specified. Failure to assemble the
crib in the manner recommended could make
the crib hazardous. Carefully remove and lay
out all parts.
Familiarize yourself with all
diagrams to facilitate the assembly of your
crib. Check parts enclosed in hardware bag
with the HARDWARE PARTS LIST to be sure
all are included and quantities are correct.
Footboard (E)
Mattress Support (G)
End Panels (F1 + F2)
Allen Wrench
Tools Needed for Assembly:
12x
4x
1x
A
Round Allenhead Bolt (30 mm)
B
Phone: 1-514-421-0309
Cap Screw (12.5 mm)
This crib has been designed for your child's
comfort and your convenience. Quality material
and workmanship have gone into this crib which
will provide a sound and comfortable bed for your
baby if properly assembled and maintained. For
the security of your child and your own peace of
mind be sure to follow the assembly instructions
exactly. Adult assembly is required. A periodic
check should be made of all bolts and screws,
which should be tightened if needed. Moisture and
heat are harmful to the finish; for this reason use
extreme caution when vaporizer is in use. The
vapor steam should always be aimed away from
the crib as well as away from other wood furniture.
Some types of soft plastic toys could damage the
finish when placed against it.
Hardware Parts List
C
F1
F2
Pali Design, Inc.
AIM-400-090109-1729
Page 1 of 6