Read this first palm ™ tungsten ™ c handheld tm.
Start here here’s what you’ll do: • charge and set up your palm™ tungsten™ c handheld. • install palm™ desktop software. • learn to use your handheld. Important! Already use a palm™ handheld? • synchronize your old handheld with your computer so that the information is up-to-date. • go to www.Palm.C...
Connect 1 usb (a) connect the hotsync® cradle to the computer.* (b) plug the adapter into an outlet and the cradle. Note: on some cradles, the adapter cable plugs into a tail on the back of the usb connector instead of the back of the cradle. * windows nt systems and systems without usb ports requir...
2 charge * problems? See troubleshooting section in the upcoming pages. (a) place your tungsten™ c handheld into the cradle. (b) check that the charging indicator light is solid green. This means your handheld is properly seated in the cradle and is being charged.* (c) charge for at least two hours ...
3 set up (a) remove the handheld from the cradle. (b) turn on the handheld by pressing the power button.* (e) tap firmly the center of at least three targets. (c) remove the stylus. (d) follow the setup instructions on the screen. 1. Tilt it forward. 2. Lift up. Power button stylus center * problems...
Function power button keyboard stylus ir port led expansion card slot headphone jack date book press to turn on handheld and open date book. Address book press to turn on handheld and open address book. 5-way navigator e-mail press to turn on handheld and open palm™ versamail™ application. Home pres...
Install software 4 install palm™ desktop software on your computer enter appointments, addresses, and other information using palm desktop software. Then transfer the information to your handheld using the hotsync process. It’s the fastest way to enter lots of information. Note: you must install the...
5 try it! Schedule an appointment on your computer mac: in the palm folder, double-click the palm desktop icon. Create or select a username to identify your information. From the create menu, select event. Enter the appointment, and then click ok to save it. Windows: double-click the palm desktop ic...
6 now schedule an appointment on your handheld. (a) press the date book button. New date book keyboard (b) tap new. (c) tap to set the time. Tap ok. (d) use the keyboard to enter a description when the blinking cursor appears...
7 synchronize information on your handheld and computer * problems? If the hotsync operation did not work, see section “troubleshooting hotsync operations”. In this step, the hotsync process synchronizes information on your handheld and in palm desktop software, so that information you enter in one ...
Use the keyboard use the keyboard to enter data on your handheld. For additional tips on using the keyboard, see the handbook . Use the 5-way navigator use the 5-way navigator for quick access to your information. • in lists, press select to insert a highlight and left to remove the highlight. • in ...
Use wi-fi use the built-in wi-fi wireless technology to connect to your network while at work, home, or traveling through wi-fi hot spots such as a nearby coffee shop, restaurant, train station, or airport. • turn on your handheld, press home , and then scroll to and tap wi-fi setup . Use the web br...
Take the quick tour the quick tour is installed after the first hotsync process. The quick tour is an overview of the features of your tungsten™ c handheld. • turn on your handheld, press home , and tap the quick tour icon . Install more software on your handheld insert the software essentials cd in...
Copyright © 2003 palm, inc. All rights reserved. Hotsync, the palm logo, and the palm powered logo are registered trademarks of palm, inc. The hotsync logo, palm, the t logo, tungsten, and versamail are trademarks of palm, inc. All other brands are trademarks or registered trademarks of their respec...
Troubleshooting the indicator light does not go on. • seat your handheld firmly in the cradle. • connect the power adapter securely to the cradle. • check that the power adapter is plugged into a working electric outlet. Your handheld does not turn on when you press the power button. • press any app...
Palm™ desktop installer does not automatically appear after you put the cd-rom into the drive. Windows : (1) click the start button. (2) select run from the start menu. (3) click browse to locate the drive with the palm desktop software cd-rom. (4) double-click the autorun.Exe file on the palm deskt...
Troubleshooting hotsync operations hotsync® process does not begin check that the handheld is properly seated in the cradle and that the cradle connector is securely connected to the computer. Windows: • make sure the hotsync icon appears in the windows system tray. If not: (a) click the start butto...
Read the handbook the handbook opens in adobe acrobat reader on your computer. If you do not have acrobat reader, you can install it from the palm desktop software cd-rom. Find more information mac: insert the palm desktop software cd-rom into the cd-rom drive, locate the documentation folder, and c...
P/n: 406-5231a-ie palm, inc. 400 n. Mccarthy blvd. Milpitas, ca 95035, usa.
