Treo 500 disassembly procedure apr 30, 2007.
Implements of assembly /disassembly a clip a screw driver (t5) a pick.
Battery cover、battery.
Antenna cover use the pick to pry antenna cover surround.
Inner frame release the 4 screw at the corner use the pick to pry up inner frame from middle case..
Mpcb (1) speaker rubber lcd fpc connector keypad connector 2m camera connector.
Mpcb (2) bend the middle case, then be made the hook release. Hold the battery connector to take out mpcb from middle case..
Keypad fpc、keypad module it ’s easy to take out the keypad fpc. Bending the middle case while push the behind keypad module. Take out the keypad module..
Qwerty key it ’s easy to take out the qwerty key..
Keypad cover use the pick to pry the hook release from middle case. The other side the same.
Qwerty key it ’s easy to take out the qwerty key..
Lcm cover the finger press the lcm cover with force. Then push the lcm cover to the leader direction. The lcm cover is separated from middle case. Take out the lcm cover..
Lcd panel bend the middle case, while push the panel in opposite direction. Be made the hook release from panel. Be careful don ’t remain the fingerprints on the panel. Take out the lcd panel..
Disassembly finished.
Treo 500 lcm cover & lens disassembly apr 30,2007.
Battery cover、battery.
Antenna cover use the pick to pry antenna cover surround.
Screws on the inner frame release the 2 screw at the top inner frame.
Lcm cover the finger press the lcm cover with force. Then push the lcm cover to the leader direction. The lcm cover is separated from middle case. Take out the lcm cover..
End.
