Palmer PGA-04 ADIG-LB User Manual - Adam Hall
Page 4
PALMER PGA-04 Owners Manual
ATTENTION
The internal load box uses tungsten lamps. These lamps will light up during constant high power
operation. You will see light through the upper and lower ventilation slits, and possibly the other
openings as well. Don’t panic, your machine isn’t about to burn up. However, you should ensure
proper air circulation so that heat can dissipate.
Furthermore, we’d like to remind you that amplifier output tubes can wear out sooner, the more they
have to deliver high power (the louder you run them). Should you be running your amp at full levels to
achieve the sound you want, anticipate having to change tubes accordingly.
SPECIFICATIONS
19”/1U passive DI for Loudspeaker Level
Integrated Load Box and Filter Section
Load Box nom. Input Impedance: 8 ohms, Rating: max Input Power 120wrms
Input Power Display: 6-pole LED chain, 3/10/30/60/120/200 watts
THRU jack (Speaker signal link) socket with break function disconnecting the internal load box
and
LEDs
OUTPUT: 2 unbalanced jack sockets, 1 balanced XLR/m socket Pin 2 hot,
All with floating ground
Output Impedance: unbalanced 10K ohm nom., Balanced 600 ohm nom.
Output level @ 14 volt input (app. 25W into 8 ohms) measured @ 1000Hz, filter volume full cw
Low/High control @center position, Full Range volume @ ccw position
Unbalanced: 0 dBu, Balanced: -10 dBu
Both values hold true at FULL RANGE VOLUME open, FILTER Volume closed
Outputs via Isolating Transformer, GND switch connecting input/output ground
adam hall
Copyrighted & Manufactured by: Palmer, a Division of Adam Hall GmBH
Rudolf Diesel-Strasse 5, D61267 Neu-Anspach, Germany
Tel.: +49 (0) 6081 94190 Fax: +49 (0) 6081 43280 Email: palmer@adamhall.com
USA and CANADA Distributor: JAMS Audio, NASHVILLE, TN. www.PALMERGEAR.com
PHONE: TOLL FREE 1-866-380-5267 , FAX: 1-866-389-5267
E-MAIL: jamsaudio@palmergear.com