Warning! The pga-05 does not contain a load box. When used with a tube amplifier, there must be a load connected to the amplifier output. See section - guitar amplifier and pga-05..
Page 2 palmer pga-05 users manual pga-05 manual adig-st advanced direct injection for guitar-stereo background the pga-05 is one of a special series devoted to the direct injection of guitar amplification. A di box should normally transfer a linear signal through its circuitry. The guitar amplifier’...
Page 3 palmer pga-05 users manual connections & set-up the pga-05 is not only useful in the studio, but also for live performances--so here are a few common set-ups. Please check the voltage requirement in your area and adjust the voltage switch accordingly. The two position switch can be found on t...
Page 4 palmer pga-05 users manual caution: never operate a tube amplifier without some sort of loadbox, as this will lead to massive and permanent damage to the amplifier. We cannot be held responsible for any damage caused by faulty wiring or ignoring this warning! Check all wiring and connections ...
Page 5 palmer pga-05 users manual pga-05 adig-st specifications special two channel di-box, with loudspeaker-simulation filters. Casing: 19” 1u rack, 170mm deep each channel input: unbalanced jack parallel output (thru): unbalanced jack input level: switchable between line and speaker level, ground-...
